Jobber Length Drill Bit, Drill Bit Size 31/64 in, Drill Bit Point Angle 130 Degrees , Cobalt, TiN, Decimal Equivalent 0.4844, Fractional Inch, Drill Bit Point Type R Thinning Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 6-15/32 in |
| Drill Bit Point Angle | 130 deg |
| Drill Bit Size | 31/64 in |
| Number of Flutes | 2 |
| Shank Dia. | 1/2 in |
| Material - Machining | Cobalt |
| Cutting Direction | Right Hand |
| Finish - Machining | TiN |
| Shank Type - Machining | Straight |
| Drill Bit Grouping | Drill Bit |
| Decimal Equivalent | 0.4844 |
| Flute Length | 111 mm |
| Flute Type | Spiral |
| Drill Bit Dimension Type | Fractional Inch |
| Application | For Alloy, Carbon And Tool Steel, Aluminum, Cast Iron, High Nickel Alloy, Stainless Steel, Titanium And Hardened Steel Under 35 HrC. |
| List Number | 1500 |
| Depth:Dia. Ratio | 5 xD |
| Number of Pieces | 1 |
| Standards | Not Rated |
| Helix Angle | 30 deg |
| Shank Length | 53 mm |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application | Steel, Tool and Die Steel |
| Drill Length Class | Jobber-Length |
| Series | 1500 |
| Sheeter Drill | No |
| Drill Diameter Tolerance | +0.000 mm/-0.027 mm |
| Material Grade - Machining | High Performance |
| Primary Material Application ISO Code | P |
| Measurement System | Fractional Inch |
| Drill Bit Point Type | R Thinning Point |
| Secondary Material Application ISO Code | N, M, P, H, K |
| Secondary Material Application | Aluminum, Cast Iron, Hardened Steel, Stainless Steel, Steel |
| Maximum Drilling Depth | 4-3/8 in |
| Spiral Direction | Right Hand |
| Helix Angle - Maximum | 30 deg |
| Helix Angle - Minimum | Not Applicable |
| Wire Rope Length | 6-15/32 in |
| Length | 6-15/32 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |