Tapered End Mill, Tapered, Cobalt, 2 Degrees Taper Angle per Side, 1/16 in Tip Dia., Uncoated, Inch, 3/16 in
| End Mill Style | Tapered |
|---|---|
| Material - Machining | Cobalt |
| End Mill Cutting Type | Center Cutting |
| Measurement System | Inch |
| Taper Angle Per Side | 2 deg |
| Tip Dia. | 1/16 in |
| Length of Cut | 1/2 in |
| Overall Length | 1-3/4 in |
| Number of Flutes | 3 |
| Shank Dia. | 3/16 in |
| Dimension Type | Fractional Inch |
| Item | Tapered End Mill |
| End Mill Material | High Speed Steel |
| Tip Diameter | 1/16 in |
| Included Angle | 4 Degrees |
| List Number | 593 |
| Cutting Direction | Right Hand |
| Helix Angle | 25 deg |
| Grade | General Purpose |
| Shank Type | Weldon |
| Finish | Bright |
| Large End Dia. | 3/16 in |
| Secondary Material Application ISO Code | M, H, K, N, S |
| Primary Material Application | Steel |
| Secondary Material Application | Aluminum, Hardened Steel, Stainless Steel, Cast Iron, Titanium |
| Primary Material Application ISO Code | P |
| Shank Type - Machining | Weldon Flat |
| Finish - Machining | Uncoated |
| Material Grade - Machining | General Purpose |
| Single End/Double End | Single End |
| Large End Diameter | 3/16 in |
| Wire Rope Length | 1-3/4 in |
| Length | 1-3/4 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |