Ball End Mill, 0.15625 in Milling Dia., Cobalt, Uncoated, Non-Coolant Through
| Dimension Type | Fractional Inch |
|---|---|
| Milling Diameter | 5/32 in |
| End Mill Material | High Speed Steel |
| Number of Flutes | 2 |
| Length of Cut | 7/16 in |
| Single End/Double End | Double |
| End Mill Cutting Type | Center Cutting |
| Grade | General Purpose |
| Shank Dia. | 3/16 in |
| Helix Angle | 30 deg |
| Stainless (M) Compatibility | Yes |
| Overall Length | 2-1/4 in |
| Steel (P) Compatibility | Yes |
| End Mill Style | Ball Nose |
| Finish | Bright |
| End Mill Application | Finishing |
| Hardened (H) Compatibility | Yes |
| Super Alloy (S) Compatibility | Yes |
| Cutting Direction | Right Hand |
| Milling Dia. | 5/32 in |
| Shank Type | Straight |
| Item | Ball End Mill |
| Cast Iron (K) Compatibility | Yes |
| Non Ferrous (N) Compatibility | No |
| List Number | 571 |
| Neck Length | Not Applicable |
| Neck Dia. | Not Applicable |
| Pitch | Not Applicable |
| Material Grade - Machining | General Purpose |
| Drilling Tool Configuration | Individual |
| Material - Machining | Cobalt |
| Measurement System | Inch |
| Chip-Breaker | No |
| Primary Material Application ISO Code | P |
| Finish - Machining | Uncoated |
| Coolant Fed | Non-Coolant Through |
| Shank Type - Machining | Weldon Flat |
| Primary Material Application | Steel |
| Series | Not Applicable |
| Flute Type | Spiral |
| Secondary Material Application ISO Code | K, M, S, N, H |
| Secondary Material Application | Titanium, Cast Iron, Aluminum, Hardened Steel, Stainless Steel |
| Flute Spacing | Fixed |
| Min. Helix Angle | Not Applicable |
| Wire Rope Length | 2-1/4 in |
| Length | 2-1/4 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |