Jobber Length Drill Bit, Drill Bit Size 9/32 in, Drill Bit Point Angle 140 Degrees , Carbide, TiAlN, Decimal Equivalent 0.2813, Fractional Inch, Drill Bit Point Type R Thinning Point, Coolant Through, Number of Coolant Holes 2
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 91 mm |
| Drill Bit Point Angle | 140 deg |
| Drill Bit Size | 9/32 in |
| Number of Flutes | 2 |
| Shank Dia. | 8 mm |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | TiAlN |
| Shank Type - Machining | Straight |
| Drill Bit Dimension Type | Fractional Inch |
| Flute Length | 53 mm |
| Depth:Dia. Ratio | 5 xD |
| Drill Bit Grouping | Drill Bit |
| List Number | HP255 |
| Decimal Equivalent | 0.2813 |
| Flute Type | Spiral |
| Application | For Aluminum : Casting, Cast Iron, Low Carbon Steel : 1010, 1018, Medium Carbon Steel : 1035, 1045, High Carbon Steel : 1065, Alloy Steels : 4140, 4340, Die Steels : 20 HrC, Stainless Steels : 300, Stainless Steels : 400, Stainless Steels : 17-4PH, Nickel Alloy: Inconel, Titanium: 6Al4V, Hardened Steels : 35 HrC, Hardened Steels : 35-45 HrC |
| Standards | Not Rated |
| Coolant Fed | Coolant Through |
| Shank Length | 38 mm |
| Primary Material Application ISO Code | P, K, H |
| Primary Material Application | Cast Iron, Hardened Steel, Steel, Tool and Die Steel |
| Measurement System | Fractional Inch |
| Helix Angle | 30 deg |
| Sheeter Drill | No |
| Maximum Drilling Depth | 53 mm |
| Secondary Material Application ISO Code | N, M, S, H |
| Secondary Material Application | Aluminum, Hardened Steel, Nickel, Stainless Steel, Titanium |
| Number of Coolant Holes | 2 |
| Drill Diameter Tolerance | +0.006 mm/+0.021 mm |
| Drill Bit Point Type | R Thinning Point |
| Series | HP255 |
| Drill Length Class | Jobber-Length |
| Helix Angle - Maximum | 30 deg |
| Wire Rope Length | 91 mm |
| Length | 91 mm |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |