Micro Drill Bit, Drill Bit Size 1.6 mm, Drill Bit Point Angle 140 Degrees , X-Thinning Point, Carbide, EXO, +0.000 mm/-0.014 mm, Spiral, 25 Degrees
| Item | Micro Drill Bit |
|---|---|
| Drill Bit Size | 1.6 mm |
| Shank Dia. | 3 mm |
| Flute Length | 10 mm |
| Overall Length | 62 mm |
| Number of Flutes | 3 |
| Drill Bit Point Angle | 140 deg |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | EXO |
| Decimal Equivalent | 0.063 |
| Finish | EXO |
| Dimension Type | Metric |
| List Number | 5310 |
| Coolant Through | No |
| Depth:Dia. Ratio | 5 xD |
| Material | Carbide |
| Point Angle | 140 deg |
| Drill Bit Dimension Type | Metric |
| Drill Bit Grouping | Drill Bit |
| Number of Pieces | 1 |
| Size | 1.6 mm |
| Depth x Dia. Ratio | 5 xD |
| Coolant Fed | Non-Coolant Through |
| Helix Angle | 25 deg |
| Series | 5310 |
| Drill Bit Point Type | X-Thinning Point |
| Material - Machining | Carbide |
| Maximum Drilling Depth | 8.5 mm |
| Circuit Board Drill | No |
| Measurement System | Metric |
| Shank Length | 37 mm |
| Shank Type - Machining | Straight |
| Drill Length Class | Micro Length |
| Aircraft Drill | No |
| Finish - Machining | EXO |
| Drill Diameter Tolerance | +0.000 mm/-0.014 mm |
| Primary Material Application ISO Code | H |
| Primary Material Application | Hardened Steel |
| Standards | Not Rated |
| Wire Rope Length | 62 mm |
| Length | 62 mm |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |