Spiral Flute Tap, Thread Size M5x0.5, Metric, Overall Length 70 mm, Powdered Metal, V, Thread Length 6.4 mm, 75 Percent Thread Drill Size #16, Thread Limit D3, Class of Fit 4H-6H, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 70 mm |
| Tap Style | Spiral Flute |
| Shank Dia. | 4.92 mm |
| Tap Chamfer | Modified Bottoming |
| Tap Material | Powdered Metal |
| Tap Size | M5 |
| Number of Flutes | 3 |
| Thread Length | 6.4 mm |
| Material Grade - Machining | V, VC-10 |
| Drill Bit Size | 4.48mm, 4.51mm, 4.54mm, 4.58mm, 4.61mm |
| Thread Size | M5x0.5 |
| Thread Direction | Right Hand |
| Spiral Direction | Right Hand |
| Primary Material Application ISO Code | P, M, H |
| Tap Finish | V |
| Secondary Material Application | Aluminum, Cast Iron, Tool and Die Steel |
| Shank Type - Machining | Straight |
| Measurement System | Metric |
| Tap Thread Size | M5X0.50 |
| Extended Neck | Yes |
| Coolant Fed | Non-Coolant Through |
| Thread Pitch | 0.5 mm |
| 55% Thread Drill Size | #14 |
| Tap Length Standard | DIN |
| Square Size | 3.86 mm |
| Series | 16500 |
| Primary Material Application | Hardened Steel, Stainless Steel, Steel |
| 65% Thread Drill Size | #15 |
| Features | DIN Overall Length, Variable Helix |
| Secondary Material Application ISO Code | P, K, N |
| Thread Limit | D3 |
| Standards | ANSI, DIN |
| 75% Thread Drill Size | #16 |
| Shank Length | 44.9 mm |
| Tap Shank Standard | ANSI |
| Helix Angle | 45 deg |
| Thread Standard | Metric |
| Cutting Direction - Machining | Right Hand |
| Size | M5 |
| Neck Length | 25.1 mm |
| Square Width | 3.86 mm |
| Class of Fit | 4H-6H |
| Shank Type | Square |
| Shank Diameter | 4.92 mm |
| Tap Application | Blind Hole |
| Square Length | 6.35 mm |
| Impact Rated | Not Applicable |
| Wire Rope Length | 70 mm |
| Length | 70 mm |
| Fits Chest Size | DIN Overall Length, Variable Helix |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |