Spiral Flute Tap, Thread Size M4x0.7, Metric, Overall Length 54 mm, Powdered Metal, Black Oxide, Thread Length 19 mm, 75 Percent Thread Drill Size 3.30, Thread Limit D4, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 53 mm |
| Tap Style | Spiral Flute |
| Shank Dia. | 4.1 mm |
| Tap Chamfer | Bottoming |
| Tap Dimension Type | Metric |
| Tap Material | Powdered Metal |
| Tap Size | M4 |
| Number of Flutes | 3 |
| Thread Length | 19 mm |
| Standards | DIN |
| Thread Direction | Right Hand |
| Tap Grouping | Tap |
| Tap Thread Type | Metric Coarse |
| Tap Finish | Black Oxide |
| Tap Thread Size | M4-0.70 |
| Cutting Direction - Machining | Right Hand |
| Series | 345NI |
| Square Size | 3.33 mm |
| Measurement System | Metric |
| 65% Thread Drill Size | 3.4 mm |
| Helix Angle | 10 deg |
| Thread Pitch | 0.7 mm |
| Material Grade - Machining | 345NI |
| Thread Limit | D4 |
| Secondary Material Application ISO Code | M, H, S |
| Extended Neck | Yes |
| Secondary Material Application | Hardened Steel, Nickel, Stainless Steel, Titanium |
| Thread Size | M4x0.7 |
| Coolant Fed | Non-Coolant Through |
| Thread Standard | Metric |
| Primary Material Application ISO Code | S |
| Features | For Through Hole Applications, Increased Hardness, Lubricity, Provides Greater Reach Capability, Wear resistance |
| Tap Shank Standard | DIN |
| 75% Thread Drill Size | 3.30 |
| 55% Thread Drill Size | 3.5 mm |
| Shank Type - Machining | Straight |
| Drill Bit Size | 3.27mm, 3.32mm, 3.36mm, 3.41mm, 3.45mm |
| Primary Material Application | Titanium, Nickel |
| Shank Length | 28 mm |
| Size | M4 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | D6 |
| List Number | 345NI |
| Square Width | 3.33 mm |
| Square Length | 3.33 mm |
| Shank Diameter | 4.26 mm |
| Shank Type | Straight |
| Wire Rope Length | 54 mm |
| Length | 54 mm |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |