Spiral Flute Tap, Thread Size #8-36, UNF, Overall Length 2 1/8 in, High Speed Steel, Black Oxide, Thread Length 3/8 in, 75 Percent Thread Drill Size #29, Thread Limit Not Applicable, Class of Fit 2B, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 2-1/8 in |
| Tap Style | Spiral Flute |
| Shank Dia. | 0.168 in |
| Tap Chamfer | Bottoming |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Size | #8 |
| Number of Flutes | 3 |
| Thread Length | 3/4 in |
| Standards | ANSI |
| Tap Thread Type | UNF |
| Tap Thread Size | #8-36 |
| Thread Direction | Right Hand |
| Tap Grouping | Tap |
| Tap Finish | Black Oxide |
| Cutting Direction - Machining | Right Hand |
| Series | 297 |
| Shank Length | 1-3/8 in |
| Class of Fit | 2 B |
| Material Grade - Machining | 297 |
| Thread Limit | Not Applicable |
| Tap Shank Standard | ANSI |
| Measurement System | Pipe |
| Features | Slow Spiral |
| Drill Bit Size | 0.1351 in, 0.1369 in, 0.1387 in, 0.1405 in, 0.1424 in |
| Square Size | 0.131 in |
| Secondary Material Application ISO Code | N |
| Thread Size | #8-36 |
| Shank Type - Machining | Straight |
| Extended Neck | Yes |
| Primary Material Application | Steel |
| Primary Material Application ISO Code | P |
| Threads per Inch | 36 |
| 75% Thread Drill Size | #29 |
| Helix Angle | 50 deg |
| Thread Standard | UNF |
| Secondary Material Application | Aluminum |
| 65% Thread Drill Size | 9/64 in |
| Coolant Fed | Non-Coolant Through |
| 55% Thread Drill Size | #27 |
| Size | #8 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | Not Rated |
| List Number | 7072 |
| Impact Rated | Not Applicable |
| Square Width | 0.131 in |
| Shank Type | Square |
| Square Length | 1/4 in |
| Shank Diameter | 11/64 in |
| Tap Application | Blind Hole |
| Wire Rope Length | 2-1/8 in |
| Length | 2-1/8 in |
| Fits Chest Size | Slow Spiral |
| Country of Origin (subject to change) | Brazil |
| Package Quantity | 1 |