Spiral Flute Tap, Thread Size M8x1.25, Metric, Overall Length 90 mm, High Speed Steel, TiN, Thread Length 10 mm, 75 Percent Thread Drill Size H, Thread Limit Not Rated, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 90 mm |
| Tap Style | Spiral Flute |
| Shank Dia. | 8.08 mm |
| Tap Chamfer | Modified Bottoming |
| Tap Dimension Type | Metric |
| Tap Material | High Speed Steel |
| Tap Size | M8 |
| Number of Flutes | 3 |
| Thread Length | 29 mm |
| Thread Direction | Right Hand |
| Tap Thread Type | Metric Coarse |
| Tap Finish | TiN |
| Tap Grouping | Tap |
| Standards | ANSI, DIN |
| Tap Thread Size | M8-1.25 |
| Series | 239 |
| Cutting Direction - Machining | Right Hand |
| Secondary Material Application | All Materials |
| 65% Thread Drill Size | I |
| Measurement System | Metric |
| Shank Length | 55 mm |
| Coolant Fed | Coolant Through |
| Tap Shank Standard | ANSI |
| Primary Material Application ISO Code | P |
| Extended Neck | Yes |
| 55% Thread Drill Size | 7.1 mm |
| Tap Length Standard | DIN |
| Material Grade - Machining | 239 |
| Helix Angle | 45 deg |
| Thread Size | M8x1.25 |
| 75% Thread Drill Size | H |
| Square Size | 6.05 mm |
| Shank Type - Machining | Straight |
| Thread Standard | Metric |
| Primary Material Application | Steel |
| Thread Pitch | 1.25 mm |
| Secondary Material Application ISO Code | P, M, K, H, N |
| Thread Limit | Not Rated |
| Drill Bit Size | 7.03mm, 6.70mm, 6.78mm, 6.86mm, 6.94mm |
| Size | M8 |
| Number of Pieces | 1 |
| List Number | 239 |
| Pitch Diameter Limit | D9 |
| Square Length | 6.05 mm |
| Shank Diameter | 8.07 mm |
| Shank Type | Straight |
| Square Width | 6.05 mm |
| Wire Rope Length | 90 mm |
| Length | 90 mm |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |