Spiral Flute Tap, Thread Size M5x0.8, Metric, Overall Length 60 mm, Vanadium High Speed Steel, Black Oxide, Thread Length 5.58 mm, 75 Percent Thread Drill Size 4.20, Thread Limit D11, Class of Fit Not Applicable, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 60 mm |
| Tap Style | Spiral Flute |
| Shank Dia. | 5 mm |
| Tap Chamfer | Modified Bottoming |
| Tap Dimension Type | Metric |
| Tap Material | High Speed Steel |
| Tap Size | M5 |
| Number of Flutes | 3 |
| Thread Length | 22 mm |
| Standards | ANSI |
| Thread Direction | Right Hand |
| Tap Thread Size | M5-0.80 |
| Tap Finish | Black Oxide |
| Tap Grouping | Tap |
| Tap Thread Type | Metric Coarse |
| Series | 299 |
| Cutting Direction - Machining | Right Hand |
| 75% Thread Drill Size | 4.20 |
| Drill Bit Size | 4.17mm, 4.22mm, 4.27mm, 4.32mm, 4.38mm |
| Thread Standard | Metric |
| Helix Angle | 45 deg |
| 55% Thread Drill Size | 4.4 mm |
| Thread Pitch | 0.8 mm |
| Thread Limit | D11 |
| Square Size | 3.86 mm |
| Features | Bright, Complete Offering, Efficient chip evacuation, For blind hole applications, HSSE material, Improves wear resistance for extended tap life, Inch and Metric, Increased wear resistance, S/O increases mechanical lubricity, Slow spiral, Spiral Flute, Steam Oxide surface treatment, TiCN coating |
| Spiral Direction | Right Hand |
| Shank Type - Machining | Straight |
| 65% Thread Drill Size | 4.3 mm |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application ISO Code | P |
| Thread Size | M5x0.8 |
| Extended Neck | Yes |
| Measurement System | Metric |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| Shank Length | 38 mm |
| Primary Material Application | Steel |
| Secondary Material Application ISO Code | P, M, K, H |
| Size | M5 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | D11 |
| List Number | 299 |
| Shank Type | Square |
| Square Width | 3.86 mm |
| Class of Fit | Not Applicable |
| Neck Length | 22.19 mm |
| Impact Rated | Not Applicable |
| Shank Diameter | 4.92 mm |
| Square Length | 6.35 mm |
| Tap Application | Blind Hole |
| Wire Rope Length | 60 mm |
| Length | 60 mm |
| Fits Chest Size | Bright, Complete Offering, Efficient chip evacuation, For blind hole applications, HSSE material, Improves wear resistance for extended tap life, Inch and Metric, Increased wear resistance, S/O increases mechanical lubricity, Slow spiral, Spiral Flute, Steam Oxide surface treatment, TiCN coating |
| Country of Origin (subject to change) | Brazil |
| Package Quantity | 1 |