Spiral Flute Tap, Thread Size #4-40, UNC, Overall Length 1 7/8 in, Vanadium High Speed Steel, TiCN, Thread Length 13/64 in, 75 Percent Thread Drill Size 2.20, Thread Limit H4, Class of Fit 2B-3B, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 1-7/8 in |
| Tap Style | Spiral Flute |
| Shank Dia. | 0.141 in |
| Tap Chamfer | Modified Bottoming |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Size | #4 |
| Number of Flutes | 3 |
| Thread Length | 9/16 in |
| Standards | ANSI |
| Tap Grouping | Tap |
| Tap Finish | TiCN |
| Thread Direction | Right Hand |
| Tap Thread Size | #4-40 |
| Tap Thread Type | UNC |
| Cutting Direction - Machining | Right Hand |
| Series | 290 |
| Material Grade - Machining | 290 |
| Threads per Inch | 40 |
| Measurement System | Pipe |
| Shank Length | 1-9/32 in |
| Secondary Material Application ISO Code | P, M, K, H |
| Primary Material Application ISO Code | P |
| Drill Bit Size | 0.0860 in, 0.0876 in, 0.0893 in, 0.0909 in, 0.0925 in |
| Thread Limit | H4 |
| Square Size | 0.109 in |
| Primary Material Application | Steel |
| Extended Neck | Yes |
| 55% Thread Drill Size | 3/32 in |
| Tap Shank Standard | ANSI |
| 75% Thread Drill Size | 2.20 |
| Thread Size | #4-40 |
| 65% Thread Drill Size | 2.3 mm |
| Helix Angle | 45 deg |
| Shank Type - Machining | Straight |
| Coolant Fed | Non-Coolant Through |
| Thread Standard | UNC |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| Size | #4 |
| Pitch Diameter Limit | H4 |
| Number of Pieces | 1 |
| List Number | 290 |
| Square Width | 0.109 in |
| Shank Diameter | 9/64 in |
| Class of Fit | 2B-3B |
| Shank Type | Square |
| Square Length | 0.188 in |
| Impact Rated | Not Applicable |
| Tap Application | Blind Hole |
| Wire Rope Length | 1-7/8 in |
| Length | 1-7/8 in |
| Country of Origin (subject to change) | Brazil |
| Package Quantity | 1 |