Spiral Point Tap, Thread Size 3/4 In.-16, UNF, Overall Length 4 1/4 in, Vanadium High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1 13/64 in, 75 Percent Thread Drill Size 17.50 mm, Thread Limit H5, Class of Fit 2B-3B, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.59 in |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | 3/4" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 4-1/4 in |
| Number of Flutes | 3 |
| Tap Finish | Uncoated |
| Number of Pieces | 1 |
| Tap Grouping | Tap |
| Thread Length | 2 in |
| Thread Direction | Right Hand |
| List Number | 280 |
| Tap Thread Size | 3/4"-16 |
| Tap Thread Type | UNF |
| Pitch Diameter Limit | H5 |
| Standards | ANSI |
| Cutting Direction - Machining | Right Hand |
| Series | 280 |
| Thread Standard | UNF |
| Drill Bit Size | 0.6851 in, 0.6891 in, 0.6932 in, 0.6972 in, 0.7013 in |
| 75% Thread Drill Size | 17.5 mm |
| 55% Thread Drill Size | 17.9 mm |
| Secondary Material Application ISO Code | M, P, H, K |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application ISO Code | P |
| Thread Size | 3/4"-16 |
| Measurement System | Fractional Inch |
| Square Size | 0.442 in |
| Extended Neck | Yes |
| Spiral Direction | Neutral |
| Threads per Inch | 16 |
| Shank Type - Machining | Straight |
| Primary Material Application | Steel |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| Shank Length | 2-17/32 in |
| Thread Limit | H5 |
| 65% Thread Drill Size | 17.7 mm |
| Helix Angle | 0 deg |
| Size | 3/4 |
| Square Length | 0.442 in |
| Class of Fit | 2B-3B |
| Square Width | 0.442 in |
| Shank Diameter | 19/32 in |
| Tap Application | Through Hole |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Wire Rope Length | 4-1/4 in |
| Length | 4-1/4 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |