Spiral Point Tap, Thread Size M4x0.7, Metric, Overall Length 63 mm, Powdered Metal, V, Right Hand, Thread Length 8 mm, 75 Percent Thread Drill Size 3.30 mm, Thread Limit D4, Class of Fit 4H-6H, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 4.26 mm |
| Tap Material | Powdered Metal |
| Tap Style | Spiral Point |
| Tap Size | M4 |
| Tap Chamfer | Modified Bottoming |
| Overall Length | 63 mm |
| Number of Flutes | 3 |
| Shank Length | 42 mm |
| Cutting Direction - Machining | Right Hand |
| Series | 16510 |
| Shank Type - Machining | Straight |
| Square Size | 3.33 mm |
| Thread Pitch | 0.7 mm |
| 55% Thread Drill Size | 3.5 mm |
| Measurement System | Metric |
| Secondary Material Application | Aluminum, Cast Iron, Tool and Die Steel |
| Secondary Material Application ISO Code | P, K, N |
| Spiral Direction | Neutral |
| 75% Thread Drill Size | 3.3 mm |
| Drill Bit Size | 3.27 mm, 3.32 mm, 3.36 mm, 3.41 mm, 3.45 mm |
| Tap Finish | V |
| Tap Shank Standard | ANSI |
| Tap Thread Size | M4x0.70 |
| Thread Standard | Metric |
| Standards | ANSI, DIN |
| 65% Thread Drill Size | 3.5 mm |
| Thread Limit | D4 |
| Coolant Fed | Non-Coolant Through |
| Thread Direction | Right Hand |
| Thread Length | 8 mm |
| Extended Neck | Yes |
| Primary Material Application | Hardened Steel, Stainless Steel, Steel |
| Tap Length Standard | DIN |
| Thread Size | M4x0.7 |
| Primary Material Application ISO Code | P, M, H |
| Class of Fit | 4H-6H |
| Size | M4 |
| Helix Angle | 0 deg |
| Shank Diameter | 4.26 mm |
| Tap Application | Through Hole |
| Square Length | 3.33 mm |
| Impact Rated | Not Applicable |
| Shank Type | Square |
| Square Width | 3.33 mm |
| Wire Rope Length | 63 mm |
| Length | 63 mm |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |