Spiral Point Tap, Thread Size #6-32, UNC, Overall Length 2 13/64 in, Vanadium High Speed Steel, Black Oxide, Right Hand, Thread Length 3/8 in, 75 Percent Thread Drill Size #36, Thread Limit Not Applicable, Class of Fit 2B, Number of Flutes 2
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.141 in |
| Tap Material | High Speed Steel |
| Tap Dimension Type | Inch |
| Tap Chamfer | Modified Bottoming |
| Tap Size | #6 |
| Tap Style | Spiral Point |
| Overall Length | 56 mm |
| Number of Flutes | 2 |
| Tap Thread Size | #6-32 |
| Tap Thread Type | UNC |
| Thread Direction | Right Hand |
| Thread Length | 11/16 in |
| Standards | ANSI, DIN |
| Tap Finish | Black Oxide |
| Tap Grouping | Tap |
| Cutting Direction - Machining | Right Hand |
| Series | 250 |
| 65% Thread Drill Size | #34 |
| Thread Limit | Not Applicable |
| Spiral Direction | Neutral |
| Tap Length Standard | DIN |
| Coolant Fed | Non-Coolant Through |
| Drill Bit Size | 0.1055 in, 0.1076 in, 0.1096 in, 0.1116 in, 0.1136 in |
| Extended Neck | Yes |
| Primary Material Application ISO Code | P |
| 75% Thread Drill Size | #36 |
| Measurement System | Pipe |
| Primary Material Application | Steel |
| Thread Size | #6-32 |
| Secondary Material Application ISO Code | M, K, P, H |
| Shank Length | 1-13/32 in |
| Thread Standard | UNC |
| Class of Fit | 2B |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| Threads per Inch | 32 |
| Shank Type - Machining | Straight |
| 55% Thread Drill Size | #32 |
| Tap Shank Standard | ANSI |
| Square Size | 0.109 in |
| Helix Angle | 0 deg |
| Size | #6 |
| Pitch Diameter Limit | H2 |
| List Number | 250 |
| Number of Pieces | 1 |
| Square Length | 0.109 in |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Shank Diameter | 9/64 in |
| Tap Application | Through Hole |
| Square Width | 0.109 in |
| Wire Rope Length | 2-13/64 in |
| Length | 2-13/64 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |