Spiral Flute Tap, Thread Size #2-56, UNC, Overall Length 1 49/64 in, High Speed Steel, Black Oxide, Thread Length 7/16 in, 75 Percent Thread Drill Size 1.73, Thread Limit H2, Thread Direction Right Hand, Number of Flutes 2
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.141 in |
| Tap Material | High Speed Steel |
| Tap Dimension Type | Inch |
| Tap Chamfer | Modified Bottoming |
| Tap Size | #2 |
| Tap Style | Spiral Flute |
| Overall Length | 45 mm |
| Number of Flutes | 2 |
| Tap Finish | Black Oxide |
| Tap Thread Size | #2-56 |
| Thread Length | 7/16 in |
| Thread Direction | Right Hand |
| Tap Thread Type | UNC |
| Tap Grouping | Tap |
| Cutting Direction - Machining | Right Hand |
| Series | 13019 |
| Tap Shank Standard | ANSI |
| Helix Angle | 50 deg |
| Thread Standard | UNC |
| Thread Size | #2-56 |
| Coolant Fed | Non-Coolant Through |
| Tap Length Standard | DIN |
| Material Grade - Machining | 13019 |
| Square Size | 0.109 in |
| Thread Limit | H2 |
| Shank Length | 1-5/16 in |
| Features | DIN overall length,, HSSE material, Nitride surface treatment, Spiral Flute |
| 65% Thread Drill Size | 1.8 mm |
| Extended Neck | Yes |
| Threads per Inch | 56 |
| 55% Thread Drill Size | #49 |
| Shank Type - Machining | Straight |
| Primary Material Application | Aluminum, Brass, Bronze, Copper |
| 75% Thread Drill Size | 1.73 |
| Primary Material Application ISO Code | N |
| Drill Bit Size | 0.0674 in, 0.0686 in, 0.0698 in, 0.0709 in, 0.0721 in |
| Measurement System | Pipe |
| Size | #2 |
| List Number | 13019 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H2 |
| Square Width | 0.109 in |
| Square Length | 0.109 in |
| Shank Type | Straight |
| Shank Diameter | 9/64 in |
| Wire Rope Length | 1-49/64 in |
| Length | 1-49/64 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |