Spiral Flute Tap, Thread Size 7/16 In.-20, UNF, Overall Length 3 15/16 in, High Speed Steel, Black Oxide, Thread Length 9/16 in, 75 Percent Thread Drill Size 9.95, Thread Limit H3, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.323 in |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Flute |
| Tap Size | 7/16" |
| Tap Chamfer | Modified Bottoming |
| Tap Dimension Type | Inch |
| Overall Length | 4 in |
| Number of Flutes | 3 |
| Thread Length | 9/16 in |
| Tap Thread Size | 7/16"-20 |
| Tap Grouping | Tap |
| Thread Direction | Right Hand |
| Tap Finish | Nitride |
| Tap Thread Type | UNF |
| Series | 13019 |
| Cutting Direction - Machining | Right Hand |
| Thread Size | 7/16"-20 |
| Extended Neck | Yes |
| Tap Length Standard | DIN |
| Drill Bit Size | 0.3855 in, 0.3888 in, 0.3920 in, 0.3953 in, 0.3985 in |
| Measurement System | Fractional Inch |
| Material Grade - Machining | 13019 |
| Square Size | 0.242 in |
| Thread Standard | UNF |
| Features | DIN overall length,, HSSE material, Nitride surface treatment, Spiral Flute |
| Coolant Fed | Non-Coolant Through |
| 55% Thread Drill Size | 10.2 mm |
| Helix Angle | 50 deg |
| Shank Length | 2-3/16 in |
| Thread Limit | H3 |
| Shank Type - Machining | Straight |
| Tap Shank Standard | ANSI |
| Threads per Inch | 20 |
| Primary Material Application ISO Code | N |
| Primary Material Application | Brass, Bronze, Copper, Aluminum |
| 65% Thread Drill Size | 10 mm |
| 75% Thread Drill Size | 9.95 |
| Size | 7/16 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H3 |
| List Number | 13019 |
| Shank Type | Straight |
| Square Length | 0.242 in |
| Shank Diameter | 21/64 in |
| Square Width | 0.242 in |
| Wire Rope Length | 3-15/16 in |
| Length | 3-15/16 in |
| Country of Origin (subject to change) | Brazil |
| Package Quantity | 1 |