Spiral Point Tap, Thread Size 7/8 In.-14, UNF, Overall Length 4 59/64 in, Cobalt High Speed Steel, TiN, Thread Length 57/64 in, 75 Percent Thread Drill Size 20.40 mm, Class of Fit 2B, Thread Direction Right Hand, Number of Flutes 4
| Item | Spiral Point Tap |
|---|---|
| Tap Style | Spiral Point |
| Tap Size | 7/8" |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Chamfer | Modified Bottoming |
| Overall Length | 125 mm |
| Number of Flutes | 4 |
| Thread Length | 2-7/32 in |
| Thread Direction | Right Hand |
| Shank Dia. | 0.697 in |
| Tap Finish | TiN |
| Tap Grouping | Tap |
| Tap Thread Size | 7/8"-14 |
| Tap Thread Type | UNF |
| Standards | ANSI, DIN |
| Cutting Direction - Machining | Right Hand |
| Series | 230 |
| Square Size | 0.523 in |
| Measurement System | Fractional Inch |
| Drill Bit Size | 0.8008 in, 0.8054 in, 0.8101 in, 0.8147 in, 0.8193 in |
| Coolant Fed | Coolant Through |
| Shank Type - Machining | Straight |
| Tap Shank Standard | ANSI |
| Primary Material Application ISO Code | P |
| Shank Length | 2-1/4 in |
| Tap Length Standard | DIN |
| Extended Neck | Yes |
| Secondary Material Application ISO Code | P, N, M, H, K |
| Secondary Material Application | All Materials |
| Thread Size | 7/8"-14 |
| 75% Thread Drill Size | 20.4 mm |
| Thread Standard | UNF |
| Threads per Inch | 14 |
| 55% Thread Drill Size | 20.9 mm |
| Class of Fit | 2B |
| 65% Thread Drill Size | 13/16 in |
| Primary Material Application | Steel |
| Helix Angle | 45 deg |
| Size | 7/8 |
| List Number | 230 |
| Pitch Diameter Limit | Not Rated |
| Number of Pieces | 1 |
| Square Length | 0.523 in |
| Shank Diameter | 45/64 in |
| Square Width | 0.523 in |
| Shank Type | Straight |
| Wire Rope Length | 4-59/64 in |
| Length | 4-59/64 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |