Spiral Point Tap, Thread Size #3-56, UNF, Overall Length 1 13/16 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1/2 in, 75 Percent Thread Drill Size #46, Thread Limit H2, Class of Fit 2B-3B, Number of Flutes 2
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.141 in |
| Tap Material | High Speed Steel |
| Tap Dimension Type | Inch |
| Tap Chamfer | Plug |
| Tap Size | #3 |
| Tap Style | Spiral Point |
| Overall Length | 1-13/16 in |
| Number of Flutes | 2 |
| Thread Length | 1/2 in |
| Tap Thread Type | UNF |
| Standards | ANSI |
| Tap Thread Size | #3-56 |
| Tap Finish | Bright |
| Tap Grouping | Tap |
| Thread Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Spiral Direction | Neutral |
| Thread Limit | H2 |
| Secondary Material Application ISO Code | Not Applicable |
| 65% Thread Drill Size | 2.13 mm |
| Shank Type - Machining | Straight |
| Square Size | 0.11 in |
| Shank Length | 1-5/16 in |
| Extended Neck | Yes |
| 75% Thread Drill Size | #46 |
| Thread Standard | UNF |
| Drill Bit Size | 0.0804 in, 0.0816 in, 0.0828 in, 0.0839 in, 0.0851 in |
| Thread Size | #3-56 |
| 55% Thread Drill Size | #44 |
| Threads per Inch | 56 |
| Measurement System | Pipe |
| Series | 105 |
| Coolant Fed | Non-Coolant Through |
| Secondary Material Application | Not Applicable |
| Class of Fit | 2B-3B |
| Helix Angle | 0 deg |
| Size | #3 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H2 |
| List Number | 105 |
| Shank Diameter | 9/64 in |
| Square Length | 0.11 in |
| Square Width | 0.11 in |
| Impact Rated | Not Applicable |
| Primary Material Application | Aluminum, Cast Iron, Steel |
| Tap Application | Through Hole |
| Primary Material Application ISO Code | P, K, N |
| Shank Type | Square |
| Wire Rope Length | 1-13/16 in |
| Length | 1-13/16 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |