Spiral Point Tap, Thread Size #10-24, UNC, Overall Length 2 3/8 in, High Speed Steel, TiN, Right Hand, Thread Length 1/2 in, 75 Percent Thread Drill Size #25, Thread Limit H3, Class of Fit 2B-3B, Number of Flutes 2
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.194 in |
| Tap Material | High Speed Steel |
| Tap Dimension Type | Inch |
| Tap Chamfer | Plug |
| Tap Size | #10 |
| Tap Style | Spiral Point |
| Overall Length | 2.38 in |
| Number of Flutes | 2 |
| Tap Thread Size | #10-24 |
| Tap Thread Type | UNC |
| Thread Direction | Right Hand |
| Number of Pieces | 1 |
| Tap Finish | TiN |
| List Number | 105 |
| Pitch Diameter Limit | H3 |
| Thread Length | 7/8 in |
| Cutting Direction - Machining | Right Hand |
| Series | 105 |
| Shank Length | 1-9/16 in |
| Shank Type - Machining | Straight |
| Coolant Fed | Non-Coolant Through |
| 55% Thread Drill Size | 4.25 mm |
| Extended Neck | Yes |
| Thread Standard | UNC |
| Thread Size | #10-24 |
| Measurement System | Pipe |
| 65% Thread Drill Size | 4.15 mm |
| Square Size | 0.152 in |
| Secondary Material Application ISO Code | Not Applicable |
| Drill Bit Size | 0.1467 in, 0.1494 in, 0.1521 in, 0.1548 in, 0.1575 in |
| Spiral Direction | Neutral |
| 75% Thread Drill Size | #25 |
| Threads per Inch | 24 |
| Thread Limit | H3 |
| Secondary Material Application | Not Applicable |
| Class of Fit | 2B-3B |
| Helix Angle | 0 deg |
| Standards | Not Applicable |
| Square Length | 0.152 in |
| Impact Rated | Not Applicable |
| Shank Type | Square |
| Primary Material Application | Aluminum, Cast Iron, Steel |
| Square Width | 0.152 in |
| Tap Application | Through Hole |
| Primary Material Application ISO Code | P, K, N |
| Shank Diameter | 3/16 in |
| Wire Rope Length | 2-3/8 in |
| Length | 2-3/8 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |