Spiral Point Tap, Thread Size 1/4 In.-20, UNC, Overall Length 2 1/2 in, High Speed Steel, TiN, Right Hand, Thread Length 41/64 in, 75 Percent Thread Drill Size #7, Thread Limit H1, Class of Fit 2B-3B, Number of Flutes 2
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.255 in |
| Tap Material | High Speed Steel |
| Tap Dimension Type | Inch |
| Tap Chamfer | Plug |
| Tap Size | 1/4" |
| Tap Style | Spiral Point |
| Overall Length | 2-1/2 in |
| Number of Flutes | 2 |
| Tap Finish | TiN |
| Tap Thread Type | UNC |
| Number of Pieces | 1 |
| Thread Length | 1 in |
| List Number | 105 |
| Thread Direction | Right Hand |
| Pitch Diameter Limit | H1 |
| Tap Thread Size | 1/4"-28 |
| Cutting Direction - Machining | Right Hand |
| Series | 105 |
| Drill Bit Size | 0.198 in, 0.2013 in, 0.2045 in, 0.2078 in, 0.211 in |
| Spiral Direction | Neutral |
| Threads per Inch | 20 |
| Secondary Material Application ISO Code | Not Applicable |
| Secondary Material Application | Not Applicable |
| Thread Limit | H1 |
| 65% Thread Drill Size | #5 |
| Shank Length | 1-9/16 in |
| Square Size | 0.191 in |
| Shank Type - Machining | Straight |
| Extended Neck | Yes |
| Coolant Fed | Non-Coolant Through |
| Measurement System | Fractional Inch |
| 55% Thread Drill Size | #3 |
| Thread Standard | UNC |
| 75% Thread Drill Size | #7 |
| Thread Size | 1/4"-20 |
| Class of Fit | 2B-3B |
| Helix Angle | 0 deg |
| Shank Type | Square |
| Shank Diameter | 1/4 in |
| Tap Application | Through Hole |
| Impact Rated | Not Applicable |
| Primary Material Application | Aluminum, Cast Iron, Steel |
| Primary Material Application ISO Code | P, K, N |
| Standards | Not Applicable |
| Square Width | 0.191 in |
| Square Length | 0.191 in |
| Wire Rope Length | 2-1/2 in |
| Length | 2-1/2 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |