Spiral Point Tap, Thread Size 3/8 In.-24, UNF, Overall Length 2 15/16 in, Cobalt, TiN, Right Hand, Thread Length 53/64 in, 75 Percent Thread Drill Size 8.50 mm, Thread Limit H11, Class of Fit Not Applicable, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.381 in |
| Tap Material | Cobalt |
| Tap Style | Spiral Point |
| Tap Size | 3/8" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 2-15/16 in |
| Number of Flutes | 3 |
| Tap Thread Type | UNF |
| Tap Grouping | Tap |
| Tap Thread Size | 3/8"-24 |
| Thread Length | 1-1/4 in |
| Tap Finish | TiN |
| Thread Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Series | 11015 |
| Thread Limit | H11 |
| Extended Neck | Yes |
| Drill Bit Size | 0.3317 in, 0.3344 in, 0.3371 in, 0.3398 in, 0.3425 in |
| Thread Size | 3/8"-24 |
| Spiral Direction | Neutral |
| Shank Length | 1-1/2 in |
| Square Size | 0.285 in |
| 65% Thread Drill Size | R |
| Primary Material Application | Stainless Steel, Steel |
| 75% Thread Drill Size | 8.5 mm |
| Secondary Material Application ISO Code | M, P, H, K, N, S |
| Coolant Fed | Non-Coolant Through |
| Shank Type - Machining | Straight |
| 55% Thread Drill Size | 11/32 in |
| Threads per Inch | 24 |
| Thread Standard | UNF |
| Measurement System | Fractional Inch |
| Secondary Material Application | Aluminum, Cast Iron, Hardened Steel, Nickel, Titanium, Tool and Die Steel |
| Primary Material Application ISO Code | P, M |
| Class of Fit | Not Applicable |
| Helix Angle | 0 deg |
| Size | 3/8 |
| Pitch Diameter Limit | H11 |
| Number of Pieces | 1 |
| List Number | 11015 |
| Impact Rated | Not Applicable |
| Standards | Not Applicable |
| Shank Diameter | 3/8 in |
| Square Width | 0.285 in |
| Tap Application | Through Hole |
| Square Length | 0.285 in |
| Shank Type | Square |
| Wire Rope Length | 2-15/16 in |
| Length | 2-15/16 in |
| Country of Origin (subject to change) | Brazil |
| Package Quantity | 1 |