Spiral Flute Tap, Thread Size #10-32, UNF, Overall Length 2 3/8 in, Powdered Metal, V, Thread Length 31/64 in, 75 Percent Thread Drill Size #21, Thread Limit H3, Class of Fit 2B-3B, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.194 in |
| Tap Material | Powdered Metal |
| Tap Style | Spiral Point |
| Tap Size | #10 |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 2-3/8 in |
| Number of Flutes | 3 |
| Tap Grouping | Tap |
| Thread Direction | Right Hand |
| Tap Thread Size | #10-32 |
| Tap Thread Type | UNF |
| Thread Length | 7/8 in |
| Tap Finish | TiCN |
| Cutting Direction - Machining | Right Hand |
| Series | 13063 |
| Primary Material Application | Titanium |
| Thread Limit | H3 |
| Thread Standard | UNF |
| Threads per Inch | 32 |
| Extended Neck | Yes |
| 55% Thread Drill Size | 4.25 mm |
| Primary Material Application ISO Code | S |
| Secondary Material Application | Hardened Steel, Stainless Steel, Steel |
| Measurement System | Pipe |
| Thread Size | #10-32 |
| Shank Length | 1-1/2 in |
| Square Size | 0.152 in |
| 65% Thread Drill Size | 4.15 mm |
| Coolant Fed | Non-Coolant Through |
| 75% Thread Drill Size | #21 |
| Drill Bit Size | 0.1575 in, 0.1596 in, 0.1616 in, 0.1636 in, 0.1656 in |
| Spiral Direction | Neutral |
| Secondary Material Application ISO Code | M, P, H |
| Shank Type - Machining | Straight |
| Class of Fit | 2B-3B |
| Helix Angle | 0 deg |
| Size | #10 |
| Pitch Diameter Limit | H3 |
| List Number | 13063 |
| Number of Pieces | 1 |
| Square Length | 1/4 in |
| Square Width | 0.152 in |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Standards | Not Applicable |
| Tap Application | Through Hole |
| Shank Diameter | 3/16 in |
| Wire Rope Length | 2-3/8 in |
| Length | 2-3/8 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |