Spiral Point Tap, Thread Size #4-40, UNC, Overall Length 1 7/8 in, Powdered Metal, Black Oxide, Right Hand, Thread Length 39/64 in, 75 Percent Thread Drill Size 2.20 mm, Thread Limit H3, Class of Fit JIS 2, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.141 in |
| Tap Material | Powdered Metal |
| Tap Style | Spiral Point |
| Tap Size | #4 |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 1-7/8 in |
| Number of Flutes | 3 |
| Tap Thread Type | UNC |
| Tap Finish | Oxide |
| Tap Thread Size | #4-40 |
| Tap Grouping | Tap |
| Thread Direction | Right Hand |
| Standards | ANSI |
| Thread Length | 9/16 in |
| Cutting Direction - Machining | Right Hand |
| Series | 312NI |
| 75% Thread Drill Size | 2.2 mm |
| Primary Material Application ISO Code | S |
| Thread Standard | UNC |
| Drill Bit Size | 0.0860 in, 0.0876 in, 0.0893 in, 0.0909 in, 0.0925 in |
| Shank Length | 1-1/4 in |
| Primary Material Application | Titanium, Nickel |
| Thread Size | #4-40 |
| 55% Thread Drill Size | 3/32 in |
| Extended Neck | Yes |
| Spiral Direction | Neutral |
| Threads per Inch | 40 |
| Thread Limit | H3 |
| Secondary Material Application ISO Code | M, H, S |
| 65% Thread Drill Size | 2.3 mm |
| Shank Type - Machining | Straight |
| Square Size | 0.109 in |
| Secondary Material Application | Titanium, Nickel, Hardened Steel, Steel |
| Coolant Fed | Non-Coolant Through |
| Measurement System | Pipe |
| Class of Fit | JIS 2 |
| Helix Angle | 0 deg |
| Size | #4 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H3 |
| List Number | 312NI |
| Shank Diameter | 9/64 in |
| Square Width | 0.109 in |
| Square Length | 0.109 in |
| Shank Type | Straight |
| Wire Rope Length | 1-7/8 in |
| Length | 1-7/8 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |