Spiral Point Tap, Thread Size 1/2 In.-20, UNF, Overall Length 3 15/16 in, Vanadium High Speed Steel, Black Oxide, Right Hand, Thread Length 59/64 in, 75 Percent Thread Drill Size 11.40 mm, Thread Limit Not Applicable, Class of Fit 2B, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.367 in |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | 1/2" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 3-15/16 in |
| Number of Flutes | 3 |
| Standards | ANSI, DIN |
| Thread Direction | Right Hand |
| Thread Length | 1-21/32 in |
| Tap Finish | Oxide |
| Tap Grouping | Tap |
| Tap Thread Size | 1/2"-20 |
| Tap Thread Type | UNF |
| Cutting Direction - Machining | Right Hand |
| Series | 250 |
| 65% Thread Drill Size | 11.6 mm |
| Primary Material Application ISO Code | P |
| Extended Neck | Yes |
| Class of Fit | 2B |
| Drill Bit Size | 0.4480 in, 0.4513 in, 0.4545 in, 0.4578 in, 0.4610 in |
| Spiral Direction | Neutral |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| Coolant Fed | Non-Coolant Through |
| Threads per Inch | 20 |
| Secondary Material Application ISO Code | M, P, H, K |
| Primary Material Application | Steel |
| 55% Thread Drill Size | 11.8 mm |
| Thread Standard | UNF |
| Shank Length | 2-9/16 in |
| Measurement System | Fractional Inch |
| Tap Shank Standard | ANSI |
| Thread Size | 1/2"-20 |
| Shank Type - Machining | Straight |
| Square Size | 0.274 in |
| Tap Length Standard | DIN |
| Thread Limit | Not Applicable |
| 75% Thread Drill Size | 11.4 mm |
| Helix Angle | 0 deg |
| Size | 1/2 |
| Number of Pieces | 1 |
| List Number | 250 |
| Pitch Diameter Limit | H2 |
| Shank Diameter | 23/64 in |
| Tap Application | Through Hole |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Square Length | 0.274 in |
| Square Width | 0.274 in |
| Wire Rope Length | 3-15/16 in |
| Length | 3-15/16 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |