Spiral Point Tap, Thread Size 1 In.-8, UNC, Overall Length 6 19/64 in, Vanadium High Speed Steel, TiN, Right Hand, Thread Length 1 1/2 in, 75 Percent Thread Drill Size 22.25 mm, Thread Limit Not Applicable, Class of Fit 2B, Number of Flutes 4
| Item | Spiral Point Tap |
|---|---|
| Tap Style | Spiral Point |
| Tap Size | 1" |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Chamfer | Plug |
| Overall Length | 6-19/64 in |
| Number of Flutes | 3 |
| Shank Dia. | 0.8 in |
| Tap Thread Type | UNC |
| Standards | ANSI, DIN |
| Tap Grouping | Tap |
| Tap Thread Size | 1"-8 |
| Thread Direction | Right Hand |
| Thread Length | 1-1/2 in |
| Tap Finish | TiN |
| Cutting Direction - Machining | Right Hand |
| Series | 260 |
| Class of Fit | 2B |
| Thread Size | 1"-8 |
| Drill Bit Size | 0.8701 in, 0.8782 in, 0.8863 in, 0.8945 in, 0.9026 in |
| Secondary Material Application ISO Code | P, N, M, H, K |
| Secondary Material Application | Aluminum, Cast Iron, Hardened Steel, Stainless Steel |
| Coolant Fed | Coolant Through |
| Tap Length Standard | DIN |
| Shank Length | 4-3/16 in |
| Primary Material Application | Steel, Tool and Die Steel |
| 75% Thread Drill Size | 22.25 mm |
| 65% Thread Drill Size | 57/64 in |
| Shank Type - Machining | Straight |
| Thread Standard | UNC |
| Primary Material Application ISO Code | P |
| Measurement System | Fractional Inch |
| Extended Neck | Yes |
| Threads per Inch | 8 |
| Tap Shank Standard | ANSI |
| 55% Thread Drill Size | 29/32 in |
| Spiral Direction | Neutral |
| Square Size | 0.6 in |
| Helix Angle | 0 deg |
| Size | 1 |
| Number of Pieces | 1 |
| List Number | 260 |
| Pitch Diameter Limit | Not Rated |
| Square Width | 0.6 in |
| Impact Rated | Not Applicable |
| Square Length | 0.6 in |
| Shank Type | Square |
| Thread Limit | Not Applicable |
| Tap Application | Through Hole |
| Shank Diameter | 51/64 in |
| Wire Rope Length | 6-19/64 in |
| Length | 6-19/64 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |