Spiral Point Tap, Thread Size #12-24, UNC, Overall Length 2 3/8 in, Vanadium High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1/2 in, 75 Percent Thread Drill Size 4.45 mm, Thread Limit H3, Class of Fit 2B-3B, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.22 in |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | #12 |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 2-3/8 in |
| Number of Flutes | 3 |
| Thread Direction | Right Hand |
| Tap Finish | Bright |
| Standards | ANSI |
| Tap Grouping | Tap |
| Tap Thread Size | #12-24 |
| Thread Length | 15/16 in |
| Tap Thread Type | UNC |
| Cutting Direction - Machining | Right Hand |
| Series | 280 |
| Secondary Material Application ISO Code | M, P, H, K |
| Extended Neck | Yes |
| Primary Material Application | Steel |
| Shank Length | 1-13/32 in |
| Thread Limit | H3 |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| Drill Bit Size | 0.1835 in, 0.1727 in, 0.1754 in, 0.1781 in, 0.1808 in |
| Threads per Inch | 24 |
| 65% Thread Drill Size | 4.6 mm |
| 55% Thread Drill Size | #21 |
| Thread Size | #12-24 |
| 75% Thread Drill Size | 4.45 mm |
| Shank Type - Machining | Straight |
| Primary Material Application ISO Code | P |
| Spiral Direction | Neutral |
| Thread Standard | UNC |
| Measurement System | Pipe |
| Square Size | 0.164 in |
| Coolant Fed | Non-Coolant Through |
| Helix Angle | 0 deg |
| Size | #12 |
| List Number | 280 |
| Pitch Diameter Limit | H2 |
| Number of Pieces | 1 |
| Tap Application | Through Hole |
| Square Width | 0.164 in |
| Shank Diameter | 7/32 in |
| Shank Type | Square |
| Class of Fit | 2B-3B |
| Impact Rated | Not Applicable |
| Square Length | 0.164 in |
| Wire Rope Length | 2-3/8 in |
| Length | 2-3/8 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |