Spiral Point Tap, Thread Size #8-32, UNC, Overall Length 2 1/8 in, Vanadium High Speed Steel, Black Oxide, Right Hand, Thread Length 3/8 in, 75 Percent Thread Drill Size 3.40 mm, Thread Limit H7, Class of Fit 2B, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.168 in |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | #8 |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 2-1/8 in |
| Number of Flutes | 3 |
| Tap Thread Type | UNC |
| Standards | ANSI |
| Tap Finish | Oxide |
| Tap Grouping | Tap |
| Tap Thread Size | #8-32 |
| Thread Length | 3/4 in |
| Thread Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Series | 280 |
| Extended Neck | Yes |
| Primary Material Application | Steel |
| Primary Material Application ISO Code | P |
| Shank Type - Machining | Straight |
| Coolant Fed | Non-Coolant Through |
| Thread Standard | UNC |
| Square Size | 0.131 in |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| Shank Length | 1-11/32 in |
| Thread Size | #8-32 |
| Measurement System | Pipe |
| Spiral Direction | Neutral |
| 55% Thread Drill Size | 3.6 mm |
| Secondary Material Application ISO Code | M, P, H, K |
| Threads per Inch | 32 |
| Drill Bit Size | 0.1315 in, 0.1336 in, 0.1356 in, 0.1376 in, 0.1396 in |
| Thread Limit | H7 |
| 65% Thread Drill Size | 3.5 mm |
| 75% Thread Drill Size | 3.4 mm |
| Class of Fit | 2B |
| Helix Angle | 0 deg |
| Size | #8 |
| Number of Pieces | 1 |
| List Number | 280 |
| Pitch Diameter Limit | H7 |
| Shank Diameter | 11/64 in |
| Square Width | 0.131 in |
| Tap Application | Through Hole |
| Square Length | 0.131 in |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Wire Rope Length | 2-1/8 in |
| Length | 2-1/8 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |