Spiral Point Tap, Thread Size 7/16 In.-14, UNC, Overall Length 3 5/32 in, High Speed Steel, TiN, Right Hand, Thread Length 7/8 in, 75 Percent Thread Drill Size U, Thread Limit Not Applicable, Class of Fit 2B, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.323 in |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | 7/16" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 3-5/32 in |
| Number of Flutes | 3 |
| Tap Grouping | Tap |
| Tap Finish | TiN |
| Thread Direction | Right Hand |
| Tap Thread Size | 7/16"-14 |
| Tap Thread Type | UNC |
| Thread Length | 7/8 in |
| Series | 287 |
| Cutting Direction - Machining | Right Hand |
| Thread Limit | Not Applicable |
| Thread Standard | UNC |
| 75% Thread Drill Size | U |
| Shank Type - Machining | Straight |
| 65% Thread Drill Size | V |
| Coolant Fed | Non-Coolant Through |
| Spiral Direction | Neutral |
| Shank Length | 1-13/16 in |
| 55% Thread Drill Size | W |
| Class of Fit | 2B |
| Extended Neck | Yes |
| Threads per Inch | 14 |
| Secondary Material Application ISO Code | N |
| Secondary Material Application | Aluminum |
| Primary Material Application ISO Code | P |
| Measurement System | Fractional Inch |
| Thread Size | 7/16"-14 |
| Drill Bit Size | 0.3633 in, 0.3679 in, 0.3726 in, 0.3772 in, 0.3818 in |
| Square Size | 0.242 in |
| Primary Material Application | Steel |
| Helix Angle | 0 deg |
| Size | 7/16 |
| List Number | 7670 |
| Pitch Diameter Limit | Not Rated |
| Number of Pieces | 1 |
| Standards | Not Applicable |
| Square Width | 0.242 in |
| Square Length | 0.242 in |
| Shank Diameter | 21/64 in |
| Tap Application | Through Hole |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Wire Rope Length | 3-5/32 in |
| Length | 3-5/32 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |