Spiral Point Tap, Thread Size 5/8 In.-11, UNC, Overall Length 3 13/16 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1 3/32 in, 75 Percent Thread Drill Size 13.60 mm, Thread Limit H5, Class of Fit 2B-3B, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.48 in |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | 5/8" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 3-13/16 in |
| Number of Flutes | 3 |
| Thread Length | 1-13/16 in |
| Tap Finish | Bright |
| Tap Thread Size | 5/8"-11 |
| Tap Grouping | Tap |
| Standards | ANSI |
| Thread Direction | Right Hand |
| Tap Thread Type | UNC |
| Cutting Direction - Machining | Right Hand |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 2-7/32 in |
| Series | 105 |
| Thread Limit | H5 |
| Threads per Inch | 11 |
| Thread Standard | UNC |
| Spiral Direction | Neutral |
| Square Size | 0.36 in |
| Drill Bit Size | 0.5305 in, 0.5364 in, 0.5423 in, 0.5482 in, 0.5541 in |
| Secondary Material Application ISO Code | Not Applicable |
| 55% Thread Drill Size | 14.2 mm |
| 75% Thread Drill Size | 13.6 mm |
| Secondary Material Application | Not Applicable |
| Measurement System | Fractional Inch |
| 65% Thread Drill Size | 13.9 mm |
| Extended Neck | Yes |
| Thread Size | 5/8"-11 |
| Shank Type - Machining | Straight |
| Class of Fit | 2B-3B |
| Helix Angle | 0 deg |
| Size | 5/8 |
| Pitch Diameter Limit | H5 |
| Number of Pieces | 1 |
| List Number | 105 |
| Primary Material Application ISO Code | P, K, N |
| Impact Rated | Not Applicable |
| Square Width | 0.36 in |
| Primary Material Application | Cast Iron, Aluminum, Steel |
| Square Length | 0.36 in |
| Shank Type | Square |
| Shank Diameter | 31/64 in |
| Tap Application | Through Hole |
| Wire Rope Length | 3-13/16 in |
| Length | 3-13/16 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |