Spiral Flute Tap, Thread Size M5x0.8, Metric, Overall Length 62 mm, Powdered Metal, V, Thread Length 9 mm, 75 Percent Thread Drill Size 4.20 mm, Thread Limit D4, Class of Fit 4H-6H, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 5 mm |
| Tap Material | Powdered Metal |
| Tap Style | Spiral Point |
| Tap Size | M5 |
| Tap Chamfer | Plug |
| Tap Dimension Type | Metric |
| Overall Length | 60 mm |
| Number of Flutes | 3 |
| Tap Grouping | Tap |
| Thread Length | 22 mm |
| Tap Finish | TiCN |
| Tap Thread Type | Metric Coarse |
| Thread Direction | Right Hand |
| Tap Thread Size | M5-0.8 |
| Cutting Direction - Machining | Right Hand |
| Series | 13163 |
| Secondary Material Application ISO Code | M, P, H |
| Thread Standard | Metric |
| Thread Pitch | 0.8 mm |
| Thread Limit | D4 |
| Primary Material Application | Titanium |
| Shank Type - Machining | Straight |
| Coolant Fed | Non-Coolant Through |
| Extended Neck | Yes |
| 55% Thread Drill Size | 4.4 mm |
| Measurement System | Metric |
| 65% Thread Drill Size | 4.3 mm |
| Square Size | 3.86 mm |
| Secondary Material Application | Hardened Steel, Stainless Steel, Steel |
| Primary Material Application ISO Code | S |
| Shank Length | 40 mm |
| Spiral Direction | Neutral |
| Drill Bit Size | 4.17 mm, 4.22 mm, 4.27 mm, 4.32 mm, 4.38 mm |
| 75% Thread Drill Size | 4.2 mm |
| Thread Size | M5x0.8 |
| Helix Angle | 0 deg |
| Size | M5 |
| List Number | 13163 |
| Pitch Diameter Limit | D4 |
| Number of Pieces | 1 |
| Class of Fit | 4H-6H |
| Square Length | 6.35 mm |
| Shank Type | Square |
| Standards | Not Applicable |
| Neck Length | 22.2 mm |
| Shank Diameter | 4.92 mm |
| Square Width | 3.86 mm |
| Tap Application | Through Hole |
| Impact Rated | Not Applicable |
| Wire Rope Length | 62 mm |
| Length | 62 mm |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |