Spiral Point Tap, Thread Size M6x0.75, Metric, Overall Length 80 mm, Powdered Metal, V, Right Hand, Thread Length 11 mm, 75 Percent Thread Drill Size 5.25 mm, Thread Limit D4, Class of Fit 4H-6H, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 6.4 mm |
| Tap Material | Powdered Metal |
| Tap Style | Spiral Point |
| Tap Size | M6 |
| Tap Chamfer | Plug |
| Tap Dimension Type | Metric |
| Overall Length | 80 mm |
| Number of Flutes | 3 |
| Tap Thread Type | Metric Fine |
| Thread Direction | Right Hand |
| Tap Grouping | Tap |
| Tap Finish | TiCN |
| Standards | ANSI, DIN |
| Thread Length | 30 mm |
| Tap Thread Size | M6-0.75 |
| Cutting Direction - Machining | Right Hand |
| Series | 16510 |
| Thread Standard | Metric |
| 65% Thread Drill Size | 5.45 mm |
| Extended Neck | Yes |
| Spiral Direction | Neutral |
| Thread Limit | D4 |
| Thread Size | M6x0.75 |
| Shank Length | 50 mm |
| Square Size | 4.85 mm |
| Thread Pitch | 0.75 mm |
| Coolant Fed | Non-Coolant Through |
| Secondary Material Application | Aluminum, Cast Iron, Tool and Die Steel |
| Primary Material Application ISO Code | P, M, H |
| 55% Thread Drill Size | 5.45 mm |
| Drill Bit Size | 5.22 mm, 5.27 mm, 5.32 mm, 5.37 mm, 5.41 mm |
| Primary Material Application | Hardened Steel, Stainless Steel, Steel |
| Tap Length Standard | DIN |
| Shank Type - Machining | Straight |
| Tap Shank Standard | ANSI |
| Measurement System | Metric |
| Secondary Material Application ISO Code | P, K, N |
| 75% Thread Drill Size | 5.25 mm |
| Class of Fit | 4H-6H |
| Helix Angle | 0 deg |
| Size | M6 |
| Pitch Diameter Limit | D4 |
| List Number | 16510 |
| Number of Pieces | 1 |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Square Width | 4.85 mm |
| Shank Diameter | 6.47 mm |
| Tap Application | Through Hole |
| Square Length | 4.85 mm |
| Wire Rope Length | 80 mm |
| Length | 80 mm |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |