Spiral Point Tap, Thread Size 3/8 In.-24, UNF, Overall Length 2 15/16 in, High Speed Steel, Black Oxide, Right Hand, Thread Length 25/32 in, 75 Percent Thread Drill Size 8.50 mm, Thread Limit Not Applicable, Class of Fit 3B, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.381 in |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | 3/8" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 2-15/16 in |
| Number of Flutes | 3 |
| Tap Thread Size | 3/8"-24 |
| Standards | ANSI |
| Thread Length | 1-1/4 in |
| Tap Finish | Oxide |
| Tap Grouping | Tap |
| Tap Thread Type | UNF |
| Thread Direction | Right Hand |
| Series | 287 |
| Cutting Direction - Machining | Right Hand |
| Thread Limit | Not Applicable |
| Primary Material Application | Steel |
| Measurement System | Fractional Inch |
| Drill Bit Size | 0.3317 in, 0.3344 in, 0.3371 in, 0.3398 in, 0.3425 in |
| Thread Standard | UNF |
| 55% Thread Drill Size | 11/32 in |
| 65% Thread Drill Size | R |
| Coolant Fed | Non-Coolant Through |
| Secondary Material Application | Aluminum |
| Square Size | 0.285 in |
| Threads per Inch | 24 |
| Primary Material Application ISO Code | P |
| Shank Length | 1-11/16 in |
| Thread Size | 3/8"-24 |
| Shank Type - Machining | Straight |
| Secondary Material Application ISO Code | N |
| Spiral Direction | Neutral |
| Class of Fit | 3B |
| 75% Thread Drill Size | 8.5 mm |
| Extended Neck | Yes |
| Helix Angle | 0 deg |
| Size | 3/8 |
| Number of Pieces | 1 |
| List Number | 7670 |
| Pitch Diameter Limit | H2 |
| Square Length | 0.285 in |
| Tap Application | Through Hole |
| Square Width | 0.285 in |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Shank Diameter | 3/8 in |
| Wire Rope Length | 2-15/16 in |
| Length | 2-15/16 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |