Spiral Point Tap, Thread Size M4x0.7, Metric, Overall Length 54 mm, Vanadium High Speed Steel, TiCN, Right Hand, Thread Length 8 mm, 75 Percent Thread Drill Size 3.30 mm, Thread Limit D11, Class of Fit Not Applicable, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 3.2 mm |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | M4 |
| Tap Chamfer | Plug |
| Tap Dimension Type | Metric |
| Overall Length | 53 mm |
| Number of Flutes | 3 |
| Tap Thread Size | M4-0.7 |
| Tap Finish | TiCN |
| Tap Grouping | Tap |
| Tap Thread Type | Metric Coarse |
| Standards | ANSI |
| Thread Direction | Right Hand |
| Thread Length | 19 mm |
| Series | 289 |
| Cutting Direction - Machining | Right Hand |
| Primary Material Application | Steel |
| 65% Thread Drill Size | 3.4 mm |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| 75% Thread Drill Size | 3.3 mm |
| Measurement System | Metric |
| Extended Neck | Yes |
| 55% Thread Drill Size | 3.5 mm |
| Shank Type - Machining | Straight |
| Square Size | 3.33 mm |
| Thread Limit | D11 |
| Primary Material Application ISO Code | P |
| Shank Length | 35 mm |
| Secondary Material Application ISO Code | M, P, H, K |
| Coolant Fed | Non-Coolant Through |
| Thread Pitch | 0.7 mm |
| Spiral Direction | Neutral |
| Drill Bit Size | 3.27 mm, 3.32 mm, 3.36 mm, 3.41 mm, 3.45 mm |
| Thread Standard | Metric |
| Thread Size | M4x0.7 |
| Class of Fit | Not Applicable |
| Helix Angle | 0 deg |
| Size | M4 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | D11 |
| List Number | 289 |
| Tap Application | Through Hole |
| Impact Rated | Not Applicable |
| Shank Type | Square |
| Square Width | 3.33 mm |
| Shank Diameter | 4.26 mm |
| Square Length | 3.33 mm |
| Wire Rope Length | 54 mm |
| Length | 54 mm |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |