Spiral Point Tap, Thread Size 1 In.-12, UNF, Overall Length 5 1/8 in, Vanadium High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1 1/2 in, 75 Percent Thread Drill Size 23.30 mm, Thread Limit H4, Class of Fit 2B, Number of Flutes 4
| Item | Spiral Point Tap |
|---|---|
| Tap Style | Spiral Point |
| Tap Size | 1" |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Chamfer | Plug |
| Overall Length | 5-1/8 in |
| Number of Flutes | 4 |
| Thread Direction | Right Hand |
| Thread Length | 1-1/2 in |
| Shank Dia. | 0.8 in |
| Tap Grouping | Tap |
| Tap Finish | Bright |
| Tap Thread Size | 1"-12 |
| Tap Thread Type | UNF |
| Standards | ANSI |
| Series | 280 |
| Cutting Direction - Machining | Right Hand |
| Square Size | 0.6 in |
| Spiral Direction | Neutral |
| Thread Size | 1"-12 |
| Thread Standard | UNF |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| Measurement System | Fractional Inch |
| Drill Bit Size | 0.9134 in, 0.9188 in, 0.9242 in, 0.9296 in, 0.9351 in |
| Extended Neck | Yes |
| Shank Type - Machining | Straight |
| 65% Thread Drill Size | 23.6 mm |
| Shank Length | 3 in |
| Thread Limit | H4 |
| 55% Thread Drill Size | 15/16 in |
| Primary Material Application | Steel |
| Primary Material Application ISO Code | P |
| Coolant Fed | Non-Coolant Through |
| 75% Thread Drill Size | 23.3 mm |
| Secondary Material Application ISO Code | P, M, H, K |
| Threads per Inch | 12 |
| Helix Angle | 0 deg |
| Size | 1 |
| List Number | 280 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H4 |
| Shank Diameter | 51/64 in |
| Class of Fit | 2B |
| Square Length | 0.6 in |
| Tap Application | Through Hole |
| Square Width | 0.6 in |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Wire Rope Length | 5-1/8 in |
| Length | 5-1/8 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |