Spiral Point Tap, Thread Size 1 1/4 In.-8, 8UN, Overall Length 5 3/4 in, Vanadium High Speed Steel, Black Oxide, Right Hand, Thread Length 1 23/32 in, 75 Percent Thread Drill Size 1.1282 in, Thread Limit H6, Class of Fit 2B-3B, Number of Flutes 4
| Item | Spiral Point Tap |
|---|---|
| Tap Style | Spiral Point |
| Tap Size | 1-1/4" |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Chamfer | Plug |
| Overall Length | 5-3/4 in |
| Number of Flutes | 4 |
| Thread Direction | Right Hand |
| Tap Grouping | Tap |
| Shank Dia. | 1.021 in |
| Thread Length | 2-9/16 in |
| Tap Thread Size | 1-1/4"-8 |
| Tap Thread Type | UNC |
| Tap Finish | Black Oxide |
| Standards | ANSI |
| Series | 280 |
| Cutting Direction - Machining | Right Hand |
| Square Size | 0.766 in |
| Thread Standard | 8UN |
| Shank Type - Machining | Straight |
| Spiral Direction | Neutral |
| 75% Thread Drill Size | 1.1282 in |
| Drill Bit Size | 1.1201 in, 1.1282 in, 1.1363 in, 1.1445 in, 1.1526 in |
| Measurement System | Fractional Inch |
| 65% Thread Drill Size | 1.1445 in |
| Coolant Fed | Non-Coolant Through |
| Secondary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Tool and Die Steel |
| Shank Length | 3-11/32 in |
| Thread Size | 1 1/4"-8 |
| Secondary Material Application ISO Code | P, M, H, K |
| Threads per Inch | 8 |
| Primary Material Application ISO Code | P |
| Extended Neck | Yes |
| Thread Limit | H6 |
| Primary Material Application | Steel |
| Class of Fit | 2B-3B |
| Helix Angle | 0 deg |
| Size | 1-1/4 |
| Number of Pieces | 1 |
| List Number | 280 |
| Pitch Diameter Limit | H6 |
| Shank Type | Square |
| Tap Application | Through Hole |
| Square Length | 0.766 in |
| Impact Rated | Not Applicable |
| Shank Diameter | 1-1/64 in |
| Square Width | 0.766 in |
| Wire Rope Length | 5-3/4 in |
| Length | 5-3/4 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |