Broca de ranura recta, tamaño de broca 8.5 mm, ángulo de punta de broca 140 grados, material de maquinado carburo, acabado de maquinado brillante (sin recubrimiento), equivalente decimal 0.3346, métrica, tipo de punta de broca de 4 facetas, longitud de ranura 43 mm
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 76.2 mm |
| Drill Bit Size | 8.5 mm |
| Drill Bit Point Angle | 140 deg |
| Flute Length | 43 mm |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.3346 |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | Bright |
| Point Type | Four Facet Point |
| Depth:Dia. Ratio | 5 xD |
| Shank Dia. | 8.5 mm |
| Coolant Through | No |
| Drill Bit Grouping | Drill Bit |
| List Number | 200 |
| Cutting Direction | Right Hand |
| Drill Bit Dimension Type | Metric |
| Depth x Dia. Ratio | 5 xD |
| Standards | Not Rated |
| Application | For Cast Iron, Low Carbon Steel : 1010, 1018 |
| Flute Type | Straight |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application ISO Code | K, P |
| Material - Machining | Carbide |
| Measurement System | Metric |
| Shank Type - Machining | Straight |
| Shank Length | 13.3 mm |
| Finish - Machining | Bright |
| Spiral Direction | Neutral |
| Primary Material Application | Cast Iron, Steel |
| Helix Angle | 0 Degrees |
| Drill Bit Point Type | 4 Facet Point |
| Sheeter Drill | No |
| Drill Length Class | Jobber-Length |
| Drill Diameter Tolerance | +0.000 mm/-0.013 mm |
| Series | 200 |
| Maximum Drilling Depth | 62.9 mm |
| Aircraft Drill | No |
| Secondary Material Application ISO Code | K, P |
| Material Grade - Machining | General Purpose |
| Secondary Material Application | Cast Iron, Steel |
| Wire Rope Length | 76.2 mm |
| Length | 76.2 mm |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |