Broca de ranura recta, tamaño de broca H, ángulo de punta de 140 grados, material de maquinado carburo, acabado de maquinado brillante (sin recubrimiento), equivalente decimal 0.266, tipo letra, tipo de punta de broca de 4 facetas, longitud de ranura 1 1/2 in
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 68.28 mm |
| Drill Bit Size | H |
| Drill Bit Point Angle | 140 deg |
| Flute Length | 1-1/2 in |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.266 |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | Bright |
| Point Type | Four Facet Point |
| List Number | 200 |
| Shank Dia. | 6.76 mm |
| Drill Bit Dimension Type | Letter |
| Drill Bit Grouping | Drill Bit |
| Coolant Through | No |
| Cutting Direction | Right Hand |
| Depth:Dia. Ratio | 5 xD |
| Depth x Dia. Ratio | 5 xD |
| Application | For Cast Iron, Low Carbon Steel : 1010, 1018 |
| Flute Type | Straight |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application ISO Code | K, P |
| Finish - Machining | Bright |
| Spiral Direction | Neutral |
| Shank Length | 30.2 mm |
| Measurement System | Letter |
| Shank Type - Machining | Straight |
| Material - Machining | Carbide |
| Primary Material Application | Cast Iron, Steel |
| Helix Angle | 0 Degrees |
| Aircraft Drill | No |
| Drill Bit Point Type | 4 Facet Point |
| Drill Length Class | Jobber-Length |
| Sheeter Drill | No |
| Series | 200 |
| Maximum Drilling Depth | 38.1 mm |
| Drill Diameter Tolerance | +0.000 mm/-0.013 mm |
| Secondary Material Application | Cast Iron, Steel |
| Secondary Material Application ISO Code | K, P |
| Material Grade - Machining | General Purpose |
| Wire Rope Length | 68.28 mm |
| Length | 68.28 mm |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |