Broca de ranura recta, tamaño de broca L, ángulo de punta de 140 grados, material de mecanizado carburo, acabado de mecanizado brillante (sin recubrimiento), equivalente decimal 0.29, letra, tipo de punta de broca de 4 facetas, longitud de ranura 1 9/16 in
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 69.85 mm |
| Drill Bit Size | L |
| Drill Bit Point Angle | 140 deg |
| Flute Length | 1-9/16 in |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.29 |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | Bright |
| Drill Bit Grouping | Drill Bit |
| Point Type | Four Facet Point |
| Drill Bit Dimension Type | Letter |
| Cutting Direction | Right Hand |
| Depth:Dia. Ratio | 5 xD |
| Coolant Through | No |
| List Number | 200 |
| Shank Dia. | 7.37 mm |
| Depth x Dia. Ratio | 5 xD |
| Application | For Cast Iron, Low Carbon Steel : 1010, 1018 |
| Coolant Fed | Non-Coolant Through |
| Measurement System | Letter |
| Shank Length | 30.2 mm |
| Finish - Machining | Bright |
| Flute Type | Straight |
| Primary Material Application ISO Code | K, P |
| Material - Machining | Carbide |
| Primary Material Application | Cast Iron, Steel |
| Shank Type - Machining | Straight |
| Standards | Not Rated |
| Spiral Direction | Neutral |
| Helix Angle | 0 Degrees |
| Maximum Drilling Depth | 39.7 mm |
| Series | 200 |
| Drill Bit Point Type | 4 Facet Point |
| Sheeter Drill | No |
| Drill Diameter Tolerance | +0.000 mm/-0.013 mm |
| Aircraft Drill | No |
| Drill Length Class | Jobber-Length |
| Secondary Material Application | Cast Iron, Steel |
| Material Grade - Machining | General Purpose |
| Secondary Material Application ISO Code | K, P |
| Wire Rope Length | 69.85 mm |
| Length | 69.85 mm |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |