Broca de ranura recta, tamaño de broca M, ángulo de punta de 140 grados, material de mecanizado carburo, acabado de mecanizado brillante (sin recubrimiento), equivalente decimal 0.295, tipo letra, tipo de punta de broca de 4 facetas, longitud de ranura 1 9/16 in
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 69.85 mm |
| Drill Bit Size | M |
| Drill Bit Point Angle | 140 deg |
| Flute Length | 1-9/16 in |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.295 |
| Drill Bit Material | Solid Carbide |
| Drill Bit Finish | Bright |
| Point Type | Four Facet Point |
| List Number | 200 |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Drill Bit Dimension Type | Letter |
| Drill Bit Grouping | Drill Bit |
| Shank Dia. | 7.49 mm |
| Depth:Dia. Ratio | 5 xD |
| Depth x Dia. Ratio | 5 xD |
| Application | For Cast Iron, Low Carbon Steel : 1010, 1018 |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 30.2 mm |
| Measurement System | Letter |
| Primary Material Application ISO Code | K, P |
| Standards | Not Rated |
| Flute Type | Straight |
| Finish - Machining | Bright |
| Material - Machining | Carbide |
| Shank Type - Machining | Straight |
| Spiral Direction | Neutral |
| Primary Material Application | Cast Iron, Steel |
| Helix Angle | 0 Degrees |
| Aircraft Drill | No |
| Drill Bit Point Type | 4 Facet Point |
| Series | 200 |
| Drill Length Class | Jobber-Length |
| Sheeter Drill | No |
| Drill Diameter Tolerance | +0.000 mm/-0.013 mm |
| Maximum Drilling Depth | 39.7 mm |
| Secondary Material Application | Cast Iron, Steel |
| Secondary Material Application ISO Code | K, P |
| Material Grade - Machining | General Purpose |
| Wire Rope Length | 69.85 mm |
| Length | 69.85 mm |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |