Straight Flute Tap, Thread Size 1/4 In.-20, UNC, Bottoming, Overall Length 3.14 in, Powdered Metal, V, Right Hand, Thread Length 0.6 in, 75 Percent Thread Drill Size #7, Thread Limit H3, Class of Fit 2B-3B
| Item | Straight Flute Hand Tap |
|---|---|
| Shank Dia. | 0.191 in |
| Tap Material | Powdered Metal |
| Tap Chamfer | Bottoming |
| Tap Size | 1/4" |
| Tap Style | Straight Flute |
| Tap Dimension Type | Inch |
| Number of Flutes | 4 |
| Overall Length | 3-5/32 in |
| Thread Direction | Right Hand |
| Tap Thread Size | 1/4"-20 |
| Tap Finish | TiCN |
| Thread Length | 1 in |
| Pitch Diameter Limit | H3 |
| Tap Thread Type | UNC |
| Tap Grouping | Tap |
| Number of Pieces | 1 |
| List Number | 10053 |
| Series | 10053 |
| Cutting Direction - Machining | Right Hand |
| Square Size | 0.19 in |
| Thread Limit | H3 |
| Extended Neck | Yes |
| 55% Thread Drill Size | #3 |
| Threads per Inch | 20 |
| Coolant Fed | Coolant Through |
| Tap Length Standard | DIN |
| Measurement System | Fractional Inch |
| 75% Thread Drill Size | #7 |
| Shank Type - Machining | Straight |
| Tap Shank Standard | ANSI |
| Thread Size | 1/4"-20 |
| Primary Material Application ISO Code | K, N |
| 65% Thread Drill Size | #5 |
| Thread Standard | UNC |
| Primary Material Application | Aluminum, Cast Iron |
| Spiral Direction | Neutral |
| Shank Length | 1-15/16 in |
| Helix Angle | 0 Degrees |
| Size | 1/4" |
| Secondary Material Application | Not Applicable |
| Features | DIN Overall Length |
| Neck Length | 1.18 in |
| Class of Fit | 2B-3B |
| Secondary Material Application ISO Code | Not Applicable |
| Standards | DIN |
| Impact Rated | Not Applicable |
| Shank Type | Square |
| Square Length | 0.31 in |
| Square Width | 0.19 in |
| Tap Application | Through Hole, Blind Hole |
| Shank Diameter | 0.255 in |
| Wire Rope Length | 3.14 in |
| Length | 3.14 in |
| Fits Chest Size | DIN Overall Length |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |