Straight Flute Tap, Thread Size 3/4 In.-10, UNC, Plug, Overall Length 4.25 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1.5 in, 75 Percent Thread Drill Size 16.50 mm, Thread Limit Not Applicable, Class of Fit 2B+
| Item | Straight Flute Hand Tap |
|---|---|
| Shank Dia. | 0.59 in |
| Tap Material | High Speed Steel |
| Tap Chamfer | Plug |
| Tap Size | 3/4" |
| Tap Style | Straight Flute |
| Tap Dimension Type | Inch |
| Number of Flutes | 4 |
| Overall Length | 4-1/4 in |
| Thread Direction | Right Hand |
| Tap Grouping | Tap |
| Tap Finish | Bright |
| Thread Length | 2 in |
| List Number | 101H |
| Standards | ANSI |
| Pitch Diameter Limit | Not Rated |
| Tap Thread Size | 3/4"-10 |
| Number of Pieces | 1 |
| Tap Thread Type | UNC |
| Cutting Direction - Machining | Right Hand |
| Series | 101H |
| Primary Material Application ISO Code | K, N, P |
| Secondary Material Application ISO Code | Not Applicable |
| Coolant Fed | Non-Coolant Through |
| Shank Type - Machining | Straight |
| Spiral Direction | Neutral |
| 65% Thread Drill Size | 16.9 mm |
| Thread Limit | Not Applicable |
| Thread Standard | UNC |
| Extended Neck | Yes |
| Measurement System | Fractional Inch |
| 55% Thread Drill Size | 17.2 mm |
| Secondary Material Application | Not Applicable |
| Primary Material Application | Aluminum, Cast Iron, Steel |
| Tap Length Standard | ANSI |
| Shank Length | 2 in |
| Tap Shank Standard | ANSI |
| Thread Size | 3/4"-10 |
| 75% Thread Drill Size | 16.5 mm |
| Threads per Inch | 10 |
| Square Size | 0.442 in |
| Helix Angle | 0 Degrees |
| Size | 3/4" |
| Features | +0.005" Oversized |
| Neck Length | 2.22 in |
| Square Length | 0.69 in |
| Tap Application | Through Hole, Blind Hole |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Shank Diameter | 0.59 in |
| Class of Fit | 2B+ |
| Square Width | 0.44 in |
| Wire Rope Length | 4-1/4 in |
| Length | 4-1/4 in |
| Fits Chest Size | +0.005" Oversized |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |