Straight Flute Tap, Thread Size 7/16 In.-14, UNC, Plug, Overall Length 3.15 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1.07 in, 75 Percent Thread Drill Size U, Thread Limit H5, Class of Fit 2B-3B
| Item | Straight Flute Hand Tap |
|---|---|
| Shank Dia. | 0.323 in |
| Tap Material | High Speed Steel |
| Tap Chamfer | Plug |
| Tap Size | 7/16" |
| Tap Style | Straight Flute |
| Tap Dimension Type | Inch |
| Number of Flutes | 4 |
| Overall Length | 3-5/32 in |
| Thread Direction | Right Hand |
| Tap Grouping | Tap |
| List Number | 101 |
| Tap Thread Size | 7/16"-14 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H5 |
| Tap Thread Type | UNC |
| Tap Finish | Bright |
| Thread Length | 1-7/16 in |
| Standards | ANSI |
| Cutting Direction - Machining | Right Hand |
| Series | 101 |
| Tap Shank Standard | ANSI |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 1-7/16 in |
| Secondary Material Application ISO Code | Not Applicable |
| Secondary Material Application | Not Applicable |
| Tap Length Standard | ANSI |
| Square Size | 0.242 in |
| Thread Size | 7/16"-14 |
| 55% Thread Drill Size | W |
| Primary Material Application ISO Code | K, N, P |
| Primary Material Application | Aluminum, Cast Iron, Steel |
| 65% Thread Drill Size | V |
| 75% Thread Drill Size | U |
| Thread Limit | H5 |
| Shank Type - Machining | Straight |
| Spiral Direction | Neutral |
| Measurement System | Fractional Inch |
| Thread Standard | UNC |
| Threads per Inch | 14 |
| Extended Neck | Yes |
| Helix Angle | 0 Degrees |
| Size | 7/16" |
| Impact Rated | Not Applicable |
| Class of Fit | 2B-3B |
| Tap Application | Through Hole, Blind Hole |
| Neck Length | 1.69 in |
| Shank Type | Square |
| Square Length | 0.41 in |
| Shank Diameter | 0.322 in |
| Square Width | 0.24 in |
| Wire Rope Length | 3.15 in |
| Length | 3.15 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |