Straight Flute Tap, Thread Size #6-40, UNF, Bottoming, Overall Length 2 in, High Speed Steel, Bright (Uncoated), Left Hand, Thread Length 0.52 in, 75 Percent Thread Drill Size #33, Thread Limit H2, Class of Fit 2B-3B
| Item | Straight Flute Hand Tap |
|---|---|
| Shank Dia. | 0.141 in |
| Tap Chamfer | Bottoming |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Size | #6 |
| Tap Style | Straight Flute |
| Overall Length | 2 in |
| Number of Flutes | 3 |
| Standards | ANSI |
| Thread Length | 11/16 in |
| Tap Finish | Bright |
| Tap Thread Size | #6-40 |
| List Number | 101L |
| Pitch Diameter Limit | H2 |
| Tap Thread Type | UNF |
| Number of Pieces | 1 |
| Thread Direction | Left Hand |
| Tap Grouping | Tap |
| Cutting Direction - Machining | Left Hand |
| Series | 101L |
| Primary Material Application ISO Code | N, P, K |
| Threads per Inch | 40 |
| 75% Thread Drill Size | #33 |
| 65% Thread Drill Size | #32 |
| 55% Thread Drill Size | #31 |
| Shank Type - Machining | Straight |
| Square Size | 0.109 in |
| Thread Standard | UNF |
| Measurement System | Pipe |
| Tap Shank Standard | ANSI |
| Tap Length Standard | ANSI |
| Extended Neck | Yes |
| Secondary Material Application ISO Code | Not Applicable |
| Coolant Fed | Non-Coolant Through |
| Thread Limit | H2 |
| Shank Length | 1-1/8 in |
| Secondary Material Application | Not Applicable |
| Thread Size | #6-40 |
| Spiral Direction | Neutral |
| Primary Material Application | Aluminum, Cast Iron, Steel |
| Helix Angle | 0 Degrees |
| Size | #6 |
| Shank Type | Square |
| Square Width | 0.11 in |
| Shank Diameter | 0.141 in |
| Class of Fit | 2B-3B |
| Impact Rated | Not Applicable |
| Tap Application | Through Hole, Blind Hole |
| Square Length | 0.19 in |
| Neck Length | 0.86 in |
| Wire Rope Length | 2 in |
| Length | 2 in |
| Country of Origin (subject to change) | Brazil |
| Package Quantity | 1 |