Straight Flute Tap, Thread Size 3/8 In.-24, UNF, Plug, Overall Length 2.93 in, High Speed Steel, TiN, Right Hand, Thread Length 0.94 in, 75 Percent Thread Drill Size 8.50 mm, Thread Limit H3, Class of Fit 2B-3B
| Item | Straight Flute Hand Tap |
|---|---|
| Shank Dia. | 0.381 in |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Size | 3/8" |
| Tap Style | Straight Flute |
| Overall Length | 2-15/16 in |
| Number of Flutes | 3 |
| Standards | ANSI |
| List Number | 103 |
| Thread Direction | Right Hand |
| Tap Thread Size | 3/8"-24 |
| Tap Grouping | Tap |
| Thread Length | 1-1/4 in |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H3 |
| Tap Finish | TiN |
| Tap Thread Type | UNF |
| Cutting Direction - Machining | Right Hand |
| Series | 103 |
| Thread Limit | H3 |
| Tap Shank Standard | ANSI |
| Threads per Inch | 24 |
| Shank Type - Machining | Straight |
| 65% Thread Drill Size | R |
| Thread Size | 3/8"-24 |
| Shank Length | 1-1/2 in |
| Thread Standard | UNF |
| Coolant Fed | Non-Coolant Through |
| Spiral Direction | Neutral |
| Square Size | 0.286 in |
| Primary Material Application ISO Code | N, P, K |
| 55% Thread Drill Size | 11/32 in |
| Measurement System | Fractional Inch |
| Secondary Material Application ISO Code | Not Applicable |
| Tap Length Standard | ANSI |
| Primary Material Application | Aluminum, Cast Iron, Steel |
| Secondary Material Application | Not Applicable |
| 75% Thread Drill Size | 8.5 mm |
| Extended Neck | Yes |
| Helix Angle | 0 Degrees |
| Size | 3/8" |
| Neck Length | 1.41 in |
| Tap Application | Through Hole, Blind Hole |
| Square Length | 0.44 in |
| Class of Fit | 2B-3B |
| Shank Diameter | 0.381 in |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Square Width | 0.29 in |
| Wire Rope Length | 2.93 in |
| Length | 2.93 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |