Tapered End Mill, Tapered, Carbide, 1 Degrees Taper Angle per Side, 3/64 in Tip Dia., WXS, Metric, 1.82 mm
| End Mill Style | Tapered |
|---|---|
| Material - Machining | Carbide |
| End Mill Cutting Type | Center Cutting |
| Measurement System | Metric |
| Taper Angle Per Side | 1 deg |
| Tip Dia. | 3/64 in |
| Length of Cut | 10 mm |
| Overall Length | 45 mm |
| Number of Flutes | 4 |
| Shank Dia. | 4 mm |
| Dimension Type | Metric |
| Item | Tapered End Mill |
| Cutting Direction | Right Hand |
| Large End Dia. | 1.82 mm |
| Helix Angle | 25 deg |
| Shank Type | Straight |
| Spiral Direction | Right Hand |
| Corner Radius | 0.75 mm |
| End Mill Material | Carbide |
| Length Below Shank | 3/8 in |
| List Number | 4,581 |
| Tip Diameter | 0.06 in |
| Grade | Micro Grain |
| Included Angle | 2 Degrees |
| Finish | WXS |
| Series | EXOCARB WXS |
| Primary Material Application ISO Code | P, H, K |
| Finish - Machining | WXS |
| Primary Material Application | Cast Iron, Hardened Steel, Steel |
| Material Applications | Alloy Steel, Carbon Steel, Cast Iron, Die Steel, Hardeneded Steel |
| End Mill Application | Roughing/Finishing |
| Material Grade - Machining | Micrograin |
| Shank Type - Machining | Straight |
| Secondary Material Application ISO Code | M |
| Large End Diameter | 1.82 mm |
| Secondary Material Application | Stainless Steel |
| Wire Rope Length | 45 mm |
| Length | 45 mm |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |