Tapered End Mill, Tapered, Carbide, 2 Degrees Taper Angle per Side, 5/64 in Tip Dia., WXS, Metric, 2.63 mm
| End Mill Style | Tapered |
|---|---|
| Material - Machining | Carbide |
| End Mill Cutting Type | Center Cutting |
| Measurement System | Metric |
| Taper Angle Per Side | 2 deg |
| Tip Dia. | 5/64 in |
| Length of Cut | 10 mm |
| Overall Length | 45 mm |
| Number of Flutes | 4 |
| Shank Dia. | 4 mm |
| Dimension Type | Metric |
| End Mill Material | Carbide |
| Tip Diameter | 0.08 in |
| Helix Angle | 25 deg |
| Finish | WXS |
| Spiral Direction | Right Hand |
| Shank Type | Straight |
| Included Angle | 4 Degrees |
| Large End Dia. | 2.63 mm |
| Item | Tapered End Mill |
| Grade | Micro Grain |
| Cutting Direction | Right Hand |
| Length Below Shank | 3/8 in |
| List Number | 4,581 |
| Corner Radius | 1 mm |
| Series | EXOCARB WXS |
| Material Applications | Alloy Steel, Carbon Steel, Cast Iron, Die Steel, Hardeneded Steel |
| Material Grade - Machining | Micrograin |
| Shank Type - Machining | Straight |
| End Mill Application | Roughing/Finishing |
| Finish - Machining | WXS |
| Primary Material Application | Cast Iron, Hardened Steel, Steel |
| Primary Material Application ISO Code | P, H, K |
| Secondary Material Application ISO Code | M |
| Secondary Material Application | Stainless Steel |
| Large End Diameter | 2.63 mm |
| Wire Rope Length | 45 mm |
| Length | 45 mm |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |