Thread Forming Tap, Thread Size 7/16 In.-14, UNC, Overall Length 3.16 in, Cobalt, Black Oxide, Right Hand, Thread Length 0.86 in, 75 Percent Thread Drill Size 10.20 mm, Thread Limit H4, Class of Fit 2B-3B
| Item | Thread Forming Tap |
|---|---|
| Tap Thread Size | 7/16"-14 |
| Tap Chamfer | Bottoming |
| Tap Finish | Oxide |
| Number of Flutes | 0 |
| Overall Length | 3-5/32 in |
| Number of Pieces | 1 |
| Tap Grouping | Tap |
| Tap Thread Type | UNC |
| Thread Direction | Right Hand |
| Shank Dia. | 0.323 in |
| Tap Material | Cobalt |
| Standards | ANSI |
| List Number | 14001 |
| Thread Length | 1-7/16 in |
| Tap Style | Thread Forming |
| Tap Size | 7/16" |
| Tap Dimension Type | Inch |
| Pitch Diameter Limit | H4 |
| Cutting Direction - Machining | Right Hand |
| Series | 14001 |
| Secondary Material Application | Hardened Steel, Stainless Steel, Steel, Tool and Die Steel |
| Secondary Material Application ISO Code | H, M, P |
| Thread Size | 7/16"-14 |
| 75% Thread Drill Size | 10.2 mm |
| Shank Length | 1-13/32 in |
| Thread Standard | UNC |
| 65% Thread Drill Size | 10.3 mm |
| Threads per Inch | 14 |
| Extended Neck | No |
| Coolant Fed | Non-Coolant Through |
| Thread Limit | H4 |
| Spiral Direction | Neutral |
| Primary Material Application ISO Code | P, N |
| 55% Thread Drill Size | 10.4 mm |
| Square Size | 0.242 in |
| Primary Material Application | Brass, Bronze, Copper, Aluminum, Steel |
| Material Grade - Machining | 14001 |
| Helix Angle | 0 Degrees |
| Square Length | 0.406 in |
| Class of Fit | 2B-3B |
| Square Width | 0.24 in |
| Tap Application | Blind Hole, Through Hole |
| Shank Diameter | 0.323 in |
| Neck Length | 1.71 in |
| Shank Type | Square |
| Wire Rope Length | 3.16 in |
| Length | 3.16 in |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |