| Item | Cartridge Valve Assembly |
|---|---|
| Body Material | Steel |
| Number of Positions | Two Positions |
| Number of Ways | Two-Way |
| Valve Cavity Size | C10 |
| Overall Height | 1-1/4 in |
| Overall Length | 4-1/2 in |
| Overall Width | 2-1/2 in |
| Voltage | Not Applicable |
| Max. Pressure (PSI) | 5,000 |
| Valve Type | Check Valve |
| Max. Flow - Hydraulic Valves | 15 gpm |
| Max. Pressure - Hydraulic Valves | 5,000 psi |
| Max. Flow GPM | 15 |
| Cartridge Valve Type | Pilot-Operated Check |
| Cartridge Valve Item | Cartridge Valve Assembly |
| Application | Used to Block Flow in One Direction, But Can be Opened Once Adequate Pilot Pressure is Applied to the Pilot Piston |
| Termination | SAE #8 |
| Standards | ISO 4406 18/16/13 |
| Operating Temperature - Minimum | -35 deg F |
| Includes Seals | Seals Included |
| Adjustment Method | Not Applicable |
| Electrical Connection Type | Not Applicable |
| Filter Rating | Not Applicable |
| Fluid Viscosity - Maximum | 2,000 SUS |
| Cartridge Material | Steel |
| Venting | Non-Vented |
| Valve Action | Normally Closed |
| Valve Control | Directional Control |
| Frequency | Not Applicable |
| Body Finish | Zinc Plated |
| Operating Temperature - Maximum | 200 deg F |
| Control Direction | One-Way |
| Inlet Pressure - Maximum | 5,000 psi |
| Flow Rate - Maximum | 16 gpm |
| Pressure Setting - Maximum | 5,000 psi |
| Mounting | Inline |
| Actuation Mechanism | Pressure |
| Includes Filter | Filter Not Included |
| Port-to-Port Length | Not Applicable |
| Series | CDPH103 |
| For Media | Mineral Oil, Synthetic Oil |
| Seal Material | Polyurethane |
| Filter Media | Not Applicable |
| Leakage | 0.13 cc/min |
| Port Connection Type | SAE O-Ring Boss |
| Port Connection Dash Size | -8 |
| Port Connection Gender | Female |
| Full Load Current | Not Applicable |
| Wire Rope Length | 4-1/2 in |
| Length | 4-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |