Water Filter Cartridge, Reduces Particulates, Micron Rating 0.45 micron, Flow Rate 10 gpm, Inside Diameter 1 1/16 in, Outside Diameter 2 11/16 in, Overall Height 10 in, Service Life Not Rated, Filter Media Polypropylene, Compatible Product Type 10 in Housings, Application Catalyst Recovery, Chemicals, Membrane Prefilter, Precious Metal Recovery, Waste Water, Cartridge Media Polypropylene, Filter Design Pleated, Maximum Pressure 35 psi, Maximum Temperature 200 Degrees F, Overall Length 10 in
| Application | Catalyst Recovery, Chemicals, Membrane Prefilter, Precious Metal Recovery, Waste Water |
|---|---|
| Flow Rate | 10 gpm |
| For Use With | 10 in Housings |
| Height | 10 in |
| Inside Dia. | 1-1/16 in |
| Max. Pressure | 35 psi |
| Max. Temp. | 160 deg F |
| Microns | 0.45 |
| Outside Dia. | 2-11/16 in |
| Service Life | Not Rated |
| Material | Glass-Filled Polypropylene (Core), Ethylene Propylene Rubber (Seal) |
| Filter Media | Polypropylene |
| Standards | FDA CFR 21 |
| Filter Cartridge Media | Polypropylene |
| Filter Flow Rate | 10 gpm |
| Reduces | Particulates |
| Filter Cartridges Sub-Category | Pleated Cartridges |
| Micron Rating | 0.45 micron |
| Filter Diameter | 2-11/16 in |
| Filter Reduces | Particulates |
| Item | Water Filter Cartridge |
| Series | Abso-Mate |
| Material of Construction | Polypropylene |
| Overall Height | 10 in |
| Filter Design | Pleated |
| Type | Polypropylene Pleated |
| Maximum Temperature | 200 deg F |
| Inside Diameter | 1-1/16 in |
| Maximum Pressure | 35 psi |
| Outside Diameter | 2-11/16 in |
| Cartridge Media | Polypropylene |
| Overall Length | 10 in |
| Accessory Type | Water Filter Cartridge |
| Compatible Product Type | 10 in Housings |
| Wire Rope Length | 10 in |
| Length | 10 in |
| Seal Material | EPDM |
| End Cap Style | DOE |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |