Pre-Drilled Linear Shaft Assembly, System of Measurement Inch, Shaft Diameter 1/2 in, Shaft Length 6 in, Shaft Material Aluminum, Shaft Material Finish Ceramic Coated, Center Height 1.125 in, Rail Base Overall Width 1.5 in, Diameter Tolerance - Maximum -0.0004 in, Length Tolerance +/- 0.5 in, Support Rail Material Finish Ceramic Coated, Shaft Drilling Pre-Drilled, Shaft Hole Spacing 4 in, Shaft End to Hole 2 in, Shaft Hole Thread Size #6, Support Rail Drilling Pre-Drilled
| Item | Pre-Drilled Linear Shaft Assembly |
|---|---|
| Shaft Dia. | 1/2 in |
| Length | 6 in |
| Material | Aluminum |
| Base Height (In.) | 0.188 |
| Mounting Hole Center to Center | 4 in |
| Dimension B | 1-1/2 in |
| Dimension C | 1/4 in |
| Overall Height (In.) | 1-3/8 |
| Mounting Hole Size | 0.169 in |
| Finish | Ceramic Coated |
| Min. Surface Hardness | 70 RC |
| Bolt Size | #6 |
| For Use With | Simplicity FrelonGOLD(TM) Lined Bearings |
| Dimension F | 0.169 in |
| Dia. Tolerance Max. | 1/2 in |
| Base Width (In.) | 1 |
| Dimension E | 1 in |
| Temp. Range (F) | 0 Degrees to 400 Degrees F |
| Mounting Surface to Shaft Center (In.) | 1-1/8 |
| Dia. Tolerance Min. | 0.499 in |
| Travel Length (In.) | 6 |
| Mounting Holes | Clean |
| Mounting Hole from Shaft End | 1 in |
| Type | Aluminum Rail/Shaft |
| System of Measurement | Inch |
| Center Height | 1-1/8 in |
| Shaft Diameter | 1/2 in |
| Shaft End to Hole | 2 in |
| Diameter Tolerance - Maximum | 0 in |
| Support Rail Length | 6 in |
| Shaft Material Finish | Ceramic Coated |
| Shaft Hole Spacing | 4 in |
| Shaft Material | Aluminum |
| Support Rail Drilling | Pre-Drilled |
| Maximum Operating Temperature | 400 deg F |
| Minimum Operating Temperature | 0 deg F |
| Support Rail Material | Aluminum |
| Shaft Hole Thread Size | #6 |
| Rail Base Overall Width | 1-1/2 in |
| Rail End to Hole | 2 in |
| Rail Mount Hole Center to Center Length | 4 in |
| Support Rail Material Finish | Ceramic Coated |
| Shaft Drilling | Pre-Drilled |
| Center to Rail End Width | 3/4 in |
| Product Type | Rail Assembly |
| Rail Mount Hole Center to Center Width | 1 in |
| Shaft Length | 6 in |
| Rail Mount Hole Thread Size | #6 |
| Resistance Properties | Corrosion Resistance, Non-Magnetic, Vibration Resistance |
| Rail Top Width | 0.188 in |
| Length Tolerance | +/- 0.5 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |